The effect of cutting parameters for the finest surface roughness during the turning of AISI 1045 with a WC insert

被引：0
|
作者：
Yong-Sun Kim
Won Tae Kwon
机构：
[1] University of Seoul,Department of Mechanical and Information Engineering
[2] University of Seoul,Faculty of Department of Mechanical and Information Engineering
来源：
Journal of Mechanical Science and Technology | 2015年 / 29卷
关键词：
Surface roughness; Interacted effect; Cutting condition; Spindle speed;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Even though many techniques have been used in the research for the quality of a surface, the effect of each cutting condition on the surface roughness has yet to be definitely determined. In the present study, the cause of the contradictory effect of the cutting condition was explained. As a result, the cutting velocity was found to be an improper cutting parameter for explaining variations in surface roughness. It was also discovered that the depth of cut could affect the surface roughness, contrary to the claims of most publications. Consequently, the optimum cutting conditions were determined for the finest surface roughness, and were proven to be significantly better than those obtained using the Taguchi method and methods described in the literature.
引用
收藏
页码：3437 / 3445
页数：8
相关论文
共 50 条
  • [1] The effect of cutting parameters for the finest surface roughness during the turning of AISI 1045 with a WC insert
    Kim, Yong-Sun
    Kwon, Won Tae
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (08) : 3437 - 3445
  • [2] Effect of cutting parameters and high-pressure coolant on forces, surface roughness and tool life in turning AISI 1045 steel
    Velan, M. Vijaya Ganesa
    Shree, M. Subha
    Muthuswamy, Padmakumar
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 43 : 482 - 489
  • [3] Effect of cutting parameters on surface roughness using orthogonal array in hard turning of AISI 1045 steel with YT5 tool
    Xiao, Zeqing
    Liao, Xiaoping
    Long, Zhenhong
    Li, Ming
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 273 - 282
  • [4] Effect of cutting parameters on surface roughness using orthogonal array in hard turning of AISI 1045 steel with YT5 tool
    Zeqing Xiao
    Xiaoping Liao
    Zhenhong Long
    Ming Li
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 93 : 273 - 282
  • [5] Effect of cutting parameters on surface roughness in turning of annealed AISI-1020 steel
    Zurita, Omar
    Di-Graci, Veronica
    Capace, Maria
    [J]. REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2018, 27 (47): : 111 - 118
  • [6] Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel
    Bartarya, Gaurav
    Choudhury, S. K.
    [J]. FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 651 - 656
  • [7] Effect of Cutting Parameters on Surface Roughness in Turning of Bone
    Ndaruhadi, P. Y. M. W.
    Sharif, S.
    Noordin, M. Y.
    Kurniawan, D.
    [J]. MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 : 708 - 712
  • [8] Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments
    Young Kug Hwang
    Choon Man Lee
    [J]. Journal of Mechanical Science and Technology, 2010, 24 : 1669 - 1677
  • [9] Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments
    Hwang, Young Kug
    Lee, Choon Man
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (08) : 1669 - 1677
  • [10] Effect of cutting parameters on surface roughness tool temperature and vibration in turning of AISI 316 Ti stainless steel
    Ay, Mustafa
    [J]. MATERIALS TESTING, 2019, 61 (01) : 71 - 79
12345