Heat transfer in open cell polyurethane foam insulation

被引:0
|
作者
J.-W. Wu
H.-S. Chu
机构
[1] Department Mechanical Engineering National Chiao Tung University Hsinchu,
[2] Taiwan,undefined
[3] Republic of China,undefined
来源
Heat and Mass Transfer | 1998年 / 34卷
关键词
Heat Transfer; Thermal Conductivity; Foam; Heat Flux; Polyurethane Foam;
D O I
暂无
中图分类号
学科分类号
摘要
This paper study systematic investigates the combined conductive and non-gray radiative heat transfer of open cell polyurethane (PU) foam in the pressure range between 760 and 0.02 Torr. Direct transmission measurements are also taken using Fourier transform infrared (FTIR) spectrometer. In doing so, experimental results are obtained for the spectral extinction coefficient from 2.5 to 25 μm. In addition, the P-3 approximation method along with the box model is employed to calculate the non-gray radiative heat flux. The diffusion approximation method is also applied to calculated the radiative conductivity. Also tested herein are three samples with different cell sizes ranging from 330 to 147 μm. According to those results, the spectral extinction coefficient increases with a decrease of cell size, leading to a decrease of thermal conductivity. Moreover, evacuating the gases in the foam cells can reduce the thermal conductivity of the PU foam by as much as 75%. Furthermore, radiative heat transfer accounts for about 4% of total heat transfer at 760 Torr and increases to 20% at 0.02 Torr.
引用
收藏
页码:247 / 254
页数:7
相关论文
共 50 条
  • [41] Strain Rate Dependent Compressive Response of Open Cell Polyurethane Foam
    Koumlis, S.
    Lamberson, L.
    EXPERIMENTAL MECHANICS, 2019, 59 (07) : 1087 - 1103
  • [42] Measurement and prediction of thermal conductivity of open cell rigid polyurethane foam
    Tao, WH
    Hsu, HC
    Chang, CC
    Hsu, CL
    Lin, YS
    JOURNAL OF CELLULAR PLASTICS, 2001, 37 (04) : 310 - 332
  • [43] Finite Element models for the viscoelasticity of open-cell polyurethane foam
    Mills, N. J.
    CELLULAR POLYMERS, 2006, 25 (05) : 293 - 316
  • [44] Experimental heat transfer due to oscillating water flow in open-cell metal foam
    Bagci, Ozer
    Dukhan, Nihad
    Ozdemir, Mustafa
    Kavurmacioglu, Levent Ali
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2016, 101 : 48 - 58
  • [45] Heat Insulation with Foam Elastomers.
    Bozzi, B.
    Guglietti, A.
    Materie plastiche ed elastomeri, 1980, (09): : 411 - 414
  • [46] HEAT-TRANSFER IN POLYSTYRENE FOAM AND POLYURETHANE FOAMS AT LOW-TEMPERATURES
    HINGST, U
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 1977, 43 (06): : 185 - 190
  • [47] Influence of oxidation on radiative heat transfer in polyurethane insulation used for district heating pipes
    Domhagen, Fredrik
    Adl-Zarrabi, Bijan
    11TH NORDIC SYMPOSIUM ON BUILDING PHYSICS (NSB2017), 2017, 132 : 309 - 314
  • [48] Investigation of electroless copper plating on polyurethane foam, as an initial step of open cell foam production process
    Dehkharghani, A. M. Fathi
    Divandari, M.
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2015, 93 (04): : 186 - 189
  • [49] Polyurethane foam scaffold for silica aerogels: effect of cell size on the mechanical properties and thermal insulation
    Merillas, B.
    Lamy-Mendes, A.
    Villafane, F.
    Duraes, L.
    Rodriguez-Perez, M. A.
    MATERIALS TODAY CHEMISTRY, 2022, 26
  • [50] REFLECTION CHARACTERISTICS OF OPEN-CELL POLYURETHANE FOAM LAYERS FOR ULTRASOUND IN AIR
    OCHI, M
    MATSUZAWA, K
    JAPANESE JOURNAL OF APPLIED PHYSICS, 1978, 17 (08) : 1449 - 1450