Effect of Different Reinforced Load Transfer Platforms on Geosynthetic-Reinforced Pile-Supported Embankment: Centrifuge Model Test

Geosynthetic-reinforced pile-supported (GRPS) embankment has been widely utilized in the railways and highways subgrade of soft clay area. The load transfer platform (LTP), consisting of sand layers and one or more layers of geosynthetic, is constantly used at the base of embankment to increase the load transfer to piles and reduce the differential settlement of embankment surface. However, the effect of different reinforced LTPs on the performances of GRPS embankment has not been fully understood. Eight centrifuge model tests were conducted to investigate the effect of five influence factors on deformation and load transfer of embankment, and tensile force of geogrid: placing geogrid or not, the number of geogrid layers, geogrid reinforced position, geogrid stiffness, wrapped-back geogrid setting in LTP. The results showed that the wrapped-back geogrid setting in the LTP was equivalent to anchoring the geogrid at the slope toe of embankment, which strengthened the reinforcement-soil interaction and restricted the pull-out displacement of geogrid to enhance the stiffness for LTP. The LTP reinforced with stiffer geogrid or multi-layer geogrid contributed to increase the stability and load transfer of embankment due to the increase of the integrity stiffness for LTP. When the geogrid was set at the middle of LTP, the performances of the GRPS embankment was enhanced due to the more interfaces between the geogrid and soil to improve the integrity stiffness of the LTP. The two-layer geogrid reinforced in the LTP could be the best choice to enhance the performance of the GRPS embankment under the comprehensive consideration of the performance and economy. The five setting ways of the reinforcement in LTP increased the integrity stiffness of LTP, which provided more methods to enhance the performances of the GRPS embankment.