Alternating-Current Electrophoretic Deposition of Spinel Coatings on Porous Metallic Substrates for Solid Oxide Fuel Cell Applications

The performance of solid oxide fuel cells (SOFCs) can be degraded by “chromium poisoning” where thermally grown Cr2O3 on metallic surfaces forms volatile Cr-containing species that are redeposited on active regions of the cathode. This phenomenon is further exacerbated for porous metallic interconnects and metal-supported electrodes due to their large surface-to-volume ratios. In this study, electrophoretic deposition (EPD) of CuNi0.2Mn1.8O4 spinel powders on porous SUS430 metallic substrates using alternating current (AC) was explored. Two-step densification heat treatment was used to form a thin, uniform, protective spinel coating. The area-specific resistance (ASR) and weight gain were tracked during 100-h oxidation tests at 700°C in air. The results showed that, despite the considerable complexity of the sample shape, AC EPD was able to form a protective coating layer that significantly limited the growth rate of the thermally grown oxide (TGO) by reducing the kg value by a factor of 25.