Effect of crosslinking rate on the glass transition temperature of polyimide cross-linked silica aerogels

被引:0
|
作者
Zhongyi Luo
Zichun Yang
Zhifang Fei
Kunfeng Li
机构
[1] Institutes of High Temperature Structural Composite Materials for Naval Ship,School of Power Engineering
[2] Naval University of Engineering,undefined
[3] Naval University of Engineering,undefined
来源
关键词
Molecular dynamics; Nano-composite; Glass transition temperature; Free volume fraction;
D O I
暂无
中图分类号
学科分类号
摘要
The polyimide cross-linked silica aerogels (PI -SiO2) was constructed at the atomistic level. The specific volume-temperature curves of the materials at different crosslinking rate were simulated by molecular dynamics. The glass transition temperature of the material was obtained, which was consistent with the results obtained by free volume fraction and mean square displacement. The higher the crosslinking rate, the higher the glass transition temperature. At the same time, the free volume fractions of the material in the rubbery state, transition state and glassy state were analyzed. It was found that the free volume fractions of the material in the rubbery state and glassy state were mainly affected by the degree of crosslinking, while the free volume fraction of the material in the transition state was affected by the crosslinking bond. In this paper, the basic factors affecting the glass transition temperature are explained from the molecular level by studying the changes of the free volume fraction in the material. Combined with the analysis of self-diffusion coefficient, the influence of molecular chain motion on the properties of materials is revealed.
引用
收藏
相关论文
共 50 条
  • [21] Mechanically strong polyimide aerogels cross-linked with low-cost polymers
    Zhang, Zhongxin
    Pan, Yuelei
    Gong, Lunlun
    Yao, Xiandong
    Cheng, Xudong
    Deng, Yurui
    RSC ADVANCES, 2021, 11 (18) : 10827 - 10835
  • [22] Sorbitol cross-linked silica aerogels with improved textural and mechanical properties
    Meti, Puttavva
    Wang, Qi
    Gong, Young-Dae
    Mahadik, D. B.
    Park, Hyung-Ho
    CERAMICS INTERNATIONAL, 2022, 48 (13) : 19198 - 19205
  • [23] Preparation and Characterization of Highly Cross-Linked Polyimide Aerogels Based on Polyimide Containing Trimethoxysilane Side Groups
    Pei, Xueliang
    Zhai, Wentao
    Zheng, Wenge
    LANGMUIR, 2014, 30 (44) : 13375 - 13383
  • [24] Silver nanoparticles cross-linked polyimide aerogels with improved high temperature microstructure stabilities and high mechanical performances
    Zhang, Tianyi
    Zhao, Yan
    Muhetaer, Mulatijiang
    Wang, Kai
    MICROPOROUS AND MESOPOROUS MATERIALS, 2020, 297 (297)
  • [25] A GENERALIZED THEORY FOR THE GLASS-TRANSITION TEMPERATURE OF CROSS-LINKED AND UNCROSSLINKED POLYMERS
    STUTZ, H
    ILLERS, KH
    MERTES, J
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1990, 28 (09) : 1483 - 1498
  • [26] GLASS-TRANSITION TEMPERATURE OF CROSS-LINKED POLY(ETHER SULFONE)S
    MAES, C
    DEVAUX, J
    LEGRAS, R
    MCGRAIL, PT
    POLYMER, 1995, 36 (16) : 3159 - 3164
  • [27] Mechanically Strong and Thermally Stable Chemical Cross-Linked Polyimide Aerogels for Thermal Insulator
    Zheng, Shuai
    Jiang, Lei
    Chang, Fan
    Zhang, Changqi
    Ma, Ning
    Liu, Xueqiang
    ACS APPLIED MATERIALS & INTERFACES, 2022, 14 (44) : 50129 - 50141
  • [28] Tailoring Properties of Cross-Linked Polyimide Aerogels for Better Moisture Resistance, Flexibility, and Strength
    Guo, Haiquan
    Meador, Mary Ann B.
    McCorkle, Linda
    Quade, Derek J.
    Guo, Jiao
    Hamilton, Bart
    Cakmak, Miko
    ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (10) : 5422 - 5429
  • [29] Flexible polyimide aerogels cross-linked by poly(maleic anhydride-alt-alkylene)
    Guo, Haiquan
    Meador, Mary Ann B.
    Wilkewitz, Brittany
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2014, 247
  • [30] High strain rate mechanical properties of a cross-linked epoxy across the glass transition
    Sirk, Timothy W.
    Khare, Ketan S.
    Karim, Mir
    Lenhart, Joseph L.
    Andzelm, Jan W.
    McKenna, Gregory B.
    Khare, Rajesh
    POLYMER, 2013, 54 (26) : 7048 - 7057