Reliability analysis of stochastic structural system considering static strength, stiffness and fatigue

被引：0

作者：

WeiGuang An

WeiTao Zhao

Hai An

机构：

[1] Harbin Engineering University,Department of Aerospace Engineering

[2] Shengyang Institute of Aeronautical Engineering,College of Aeronautics and Astronautics

来源：

Science in China Series G: Physics, Mechanics and Astronomy | 2007年 / 50卷

关键词：

structural system reliability; dead failure; fatigue failure; stiffness failure; failure mechanism; correlation;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Multi-failures are possible to appear in the process of using the structural system, such as dead load failure, fatigue failure and stiffness failure. The expression of residual resistance is given based on the impact of random crack propagation induced by the fatigue load on the critical limit stress and section modulus in this paper. The failure modes of every element of the structural system are analyzed under dead and fatigue loads, and the influence of the correlation of failure modes on reliability of the element is considered. Failure mechanism and the correlation of failure modes under dead and fatigue loads are discussed, and the method of reliability analysis considering static strength, fatigue and stiffness is given. A numerical example is analyzed, which indicates that the failure probability is different for different use life and the influence of dead and fatigue loads on reliability of the structural system is different as well. This method of reliability analysis, in the paper, is better than the method only considering a single factor (or static strength, or fatigue, or stiffness, etc.) in the case of practical engineering.

引用

页码：357 / 369

页数：12

共 50 条

[31] A time-dependent probabilistic fatigue analysis method considering stochastic loadings and strength degradation
Su, Chunbo
Yu, Shui
Wang, Zhonglai
Tayyab, Zafar
ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (07)
[32] PROBABILISTIC ANALYSIS OF WIND TURBINE BLADES CONSIDERING STIFFNESS, STRENGTH AND STABILITY UNDER EXTREME AND FATIGUE LOADING
Bacharoudis, Konstantinos C.
Lekou, Denja J.
Philippidis, Theodore P.
20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
[33] Static strength and Fatigue Strength Analysis for Bogie Frame of EMU
Ma, Si Qun
Zhao, Wen Zhong
PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 4, 2009, : 95 - 99
[34] Time-Varying Reliability Analysis of Mechanisms with Strength Degradation Considering Clearances and Local Stiffness Effects
Gao, Peng
APPLIED SCIENCES-BASEL, 2024, 14 (16):
[35] Durability analysis of the pulley in the power steering system considering the variation of the fatigue strength
Kim, JK
Shim, HJ
Kim, CS
FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 : 429 - 434
[36] Fatigue strength reliability analysis of diesel connecting rod based on stochastic finite element method
Yi, C
Mingwu, W
Ling, T
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1999, 121 (04): : 741 - 745
[37] Fatigue reliability analysis of structural system based on finite volume method
Yu Y.
Li J.
Chen W.
Lu S.
Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2017, 38 (09): : 1413 - 1419
[38] The life's analysis on the existing structural system based on fatigue reliability
Jiang, Feng-guo
An, Wei-guang
2006 XI'AN INTERNATIONAL CONFERENCE OF ARCHITECTURE AND TECHNOLOGY, PROCEEDINGS: ARCHITECTURE IN HARMONY, 2006, : 397 - 400
[39] Fatigue analysis of locking parts in the gauge-adjustable wheelsets system considering the variation of the fatigue strength
Kim, Chul-Su
Jang, Cheon-Soo
Jang, Seung-Ho
Kim, Jung-Kyu
ADVANCES IN FRACTURE AND MATERIALS BEHAVIOR, PTS 1 AND 2, 2008, 33-37 : 217 - +
[40] Propeller blade structural reliability analysis considering mixed-mode fatigue crack growth
Kim, Namkyu
Kwon, Hyeok-Jun
Kim, Hwasoo
Lee, Dooyoul
ENGINEERING FAILURE ANALYSIS, 2024, 158

← 1 2 3 4 5 →