Improved dielectric properties of CaCu3Ti4O12 films with a CaTiO3 interlayer on Pt/TiO2/SiO2/Si substrates prepared by pulsed laser deposition

被引:0
|
作者
Sung-Yun Lee
Hui Eun Kim
William Jo
Young-Hwan Kim
Sang-Im Yoo
机构
[1] Seoul National University,Department of Materials Science and Engineering, Research Institute of Advanced Materials (RIAM)
[2] Ewha Womans University,Department of Physics
[3] Korea Institute of Science and Technology,Nano
来源
Electronic Materials Letters | 2015年 / 11卷
关键词
CaCu; Ti; O; films; pulsed laser deposition; dielectric property; Poole-Frenkel conduction model; leakage current;
D O I
暂无
中图分类号
学科分类号
摘要
We report the greatly improved dielectric properties of CaCu3Ti4O12 (CCTO) films with a 60 nm-thick CaTiO3 (CTO) interlayer on Pt/TiO2/SiO2/Si substrates. Both CCTO films and CTO interlayers were prepared by pulsed laser deposition (PLD). With increasing the thickness of CCTO from 200 nm to 1.3 μm, the dielectric constants (εr) at 10 kHz in both CCTO single-layered and CCTO/CTO double-layered films increased from ∼260 to ∼6000 and from ∼630 to ∼3700, respectively. Compared with CCTO single-layered films, CCTO/CTO double-layered films irrespective of CCTO film thickness exhibited a remarkable decrease in their dielectric losses (tanδ) (<0.1 at the frequency region of 1 - 100 kHz) and highly reduced leakage current density at room temperature. The reduced leakage currents in CCTO/CTO double-layered films are attributable to relatively higher trap ionization energies in the Poole-Frenkel conduction model.
引用
收藏
页码:1003 / 1011
页数:8
相关论文
共 50 条
  • [21] Effect of SiO2 on sintering and dielectric properties of CaCu3Ti4O12 nanofibers
    Mohammadi, M.
    Alizadeh, P.
    Clemens, F. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 688 : 270 - 279
  • [22] Effect of excess TiO2 in CaCu3Ti4O12 on the microstructure and dielectric properties
    Mohamed, Julie J.
    Hutagalung, Sabar D.
    Ain, Mohd Fadzil
    Ahmad, Zainal A.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2011, 12 (05): : 496 - 499
  • [23] High dielectric constant in CaCu3Ti4O12 thin film prepared by pulsed laser deposition
    Zhao, YL
    Pan, GW
    Ren, QB
    Cao, YG
    Feng, LX
    Jiao, ZK
    THIN SOLID FILMS, 2003, 445 (01) : 7 - 13
  • [24] High dielectric constant in CaCu3Ti4O12 thin film prepared by pulsed laser deposition
    Zhao, Y.L.
    Pan, G.W.
    Ren, Q.B.
    Cao, Y.G.
    Feng, L.X.
    Jiao, Z.K.
    2003, Elsevier (445)
  • [25] Influence of vanadium on electrical and microstructural properties of CaCu3Ti4O12/CaTiO3
    Ramajo, L.
    Parra, R.
    Varela, J. A.
    Reboredo, M. M.
    Ramirez, M. A.
    Castro, M. S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 497 (1-2) : 349 - 353
  • [26] Influence of SiO2 additives on the microstructure and dielectric properties of CaCu3Ti4O12 ceramics
    Li, Wang
    Gong, Hui-Ling
    Liu, Yu
    Liu, Bing-Fa
    Liu, Gui-Hua
    Du, Guo-Ping
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2009, 38 (06): : 1365 - 1369
  • [27] Pyroelectric properties of CaCu3Ti4O12 thin films grown by pulsed laser deposition
    Cong Chen
    Tingyin Ning
    Heng Lu
    Can Wang
    Dongxiang Zhang
    Pei Wang
    Hai Ming
    Yueliang Zhou
    Guozhen Yang
    Applied Physics A, 2010, 99 : 849 - 852
  • [28] Significantly improved giant dielectric properties and enhanced nonlinear coefficient of Ni2+ doped CaCu3Ti4O12/CaTiO3 composites
    Prachamon, Jirata
    Sattapol, Pratumwan
    Chanlek, Narong
    Putasaeng, Bundit
    Phromviyo, Nutthakritta
    Harnchana, Viyada
    Swatsitang, Ekaphan
    Thongbai, Prasit
    HELIYON, 2023, 9 (06)
  • [29] Pyroelectric properties of CaCu3Ti4O12 thin films grown by pulsed laser deposition
    Chen, Cong
    Ning, Tingyin
    Lu, Heng
    Wang, Can
    Zhang, Dongxiang
    Wang, Pei
    Ming, Hai
    Zhou, Yueliang
    Yang, Guozhen
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2010, 99 (04): : 849 - 852
  • [30] Enhanced dielectric and non-ohmic properties in CaCu3Ti4O12/CaTiO3 nanocomposites prepared by a chemical combustion method
    Jutapol Jumpatam
    Prasit Thongbai
    Journal of Materials Science: Materials in Electronics, 2016, 27 : 12085 - 12090