Upset Forging Temperature Effect on Structure and Tribological Properties of Sintered Al–7Fe–38Sn Alloy

被引：0
|
作者：
N. M. Rusin
A. L. Skorentsev
V. E. Likharev
机构：
[1] Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences,
来源：
Russian Physics Journal | 2024年 / 67卷
关键词：
hybrid composite material; sintering; upset forging; structure; tribological properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper focuses on upset forging of the sintered Al–7Fe–38Sn alloy in a closed mold and the process temperature, both affecting its structure and tribological properties. The Al–7Fe–38Sn composite consists of the hard (Al3Fe) and soft (Sn) phases in 17 and 20 volume fractions, respectively. It is found that ≤250°C forging has a negative effect on the composite plasticity, whereas at 300°C, the plasticity restores and even grows after multiple compression. Tensile strength of the composite remains stable and is ~130 MPa. It is found that Al3Fe phase particles intensively dissolve during heating up to the forging temperature in the presence of liquid tin.
引用
收藏
页码：9 / 16
页数：7
相关论文
共 50 条
  • [21] Influence of Phase Structure Evolution on the Functional Properties of Sintered Hybride Al-Fe-Sn Composites
    Rusin, N. M.
    Skorentsev, A. L.
    Mironov, Y. P.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
  • [22] Effect of temperature on tensile properties of Fe3Al alloy
    Zhang, Dezhi
    Xiao, Jimei
    1997, (05):
  • [23] EFFECT OF EXTRUSION TEMPERATURE ON PROPERTIES OF Al-Fe-X ALLOY
    Wang Richu
    Li Wenxian
    Li Shongrui
    Zen Yuxiao(Department of Materials Science and Engineering
    Transactions of Nonferrous Metals Society of China, 1994, (04) : 97 - 100
  • [24] Effect of extrusion temperature on properties of Al-Fe-X alloy
    Wang, Richu
    Li, Wenxian
    Li, Shongrui
    Zen, Yuxiao
    Transactions of Nonferrous Metals Society of China, 1994, 4 (04)
  • [25] Effect of the Reinforcing Particle Introduction Method on the Tribomechanical Properties of Sintered Al-Sn-Fe Alloys
    Rusin, Nikolay M.
    Skorentsev, Alexander L.
    Dmitriev, Andrey I.
    METALS, 2023, 13 (08)
  • [26] The Effect of Heat Treatment on the Tribological Properties and Room Temperature Corrosion Behavior of Fe-Cr-Al-Based OPH Alloy
    Khalaj, Omid
    Saebnoori, Ehsan
    Jirkova, Hana
    Chocholaty, Ondrej
    Kucerova, Ludmila
    Hajsman, Jan
    Svoboda, Jiri
    MATERIALS, 2020, 13 (23) : 1 - 15
  • [27] Effect of Hot Forging Temperature on Microstructure, Texture, and Mechanical Properties of 2219 Al Alloy Forgings
    Wang, Huimin
    Li, Yanguang
    Wu, Jingyi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 33 (20) : 11402 - 11410
  • [28] THE EFFECT OF COMPOSITION AND FORGING TEMPERATURE ON THE STRUCTURE AND PROPERTIES OF A VARIETY OF AL-MG ALLOYS
    SANDERS, TH
    SWARTZWELDER, JH
    JOURNAL OF METALS, 1980, 32 (08): : 7 - 7
  • [29] Effect of Multidirectional Forging on the Grain Structure and Mechanical Properties of the Al-Mg-Mn Alloy
    Kishchik, Mikhail S.
    Mikhaylovskaya, Anastasia V.
    Kotov, Anton D.
    Mosleh, Ahmed O.
    AbuShanab, Waheed S.
    Portnoy, Vladimir K.
    MATERIALS, 2018, 11 (11):
  • [30] Effect of Hot Densification on Tribotechnical Properties of Sintered (Al-12Si)-40Sn Alloy
    Rusin, N. M.
    Skorentsev, A. L.
    Kolubaev, E. A.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2017 (AMHS'17), 2017, 1909
12345