Densification of Al-2024 and Al-2024/Al2O3 Powders by Conventional P/M Route and ECAP: A Comparative Study

被引：0
|
作者：
Nishtha Gupta
B. Ravisankar
S. Kumaran
T. Srinivasa Rao
机构：
[1] National Institute of Technology,Department of Metallurgical and Materials Engineering
[2] National Institute of Technology,undefined
来源：
Transactions of the Indian Institute of Metals | 2012年 / 65卷
关键词：
Al-2024, Al-2024 composites; Back pressure ECAP; Nano indentation; Mechanical alloying;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, mechanically alloyed Al-2024 and Al-2024/Al2O3 powders are densified by conventional sintering and by equal channel angular pressing (ECAP) with and without back pressure. The powder was encapsulated in an aluminium can for consolidation through ECAP. The properties obtained in the compacts by conventional sintering route and by ECAP are compared. The effect of conventional sintering and ECAP on consolidation behaviour of powder, microstructure, density and hardness is discussed. Room temperature back pressure aided ECAP results in nearly full denser (97 % of its theoretical density) compact at room temperature. Nano Indentation technique was used to determine the modulus of the consolidated compacts.
引用
收藏
页码：381 / 386
页数：5
相关论文
共 50 条
  • [21] Mechanomaking of Fe/Al2O3 and FeCr/Al2O3 nanocomposites powders fabrication
    Matteazzi, P
    Alcala, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 230 (1-2): : 161 - 170
  • [22] Synthesis and Photoluminescence of γ-Al2O3 and C-doped γ-Al2O3 Powders
    Wang, S. F.
    Zhuang, C. F.
    Yuan, Y. G.
    Xiang, X.
    Sun, G. Z.
    Ding, Q. P.
    Li, Z. J.
    Zu, X. T.
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2014, 73 (01) : 37 - 42
  • [23] A COMPARATIVE STUDY OF THE DOSIMETRIC FEATURES OF α-Al2O3:C,Mg AND α-Al2O3:C
    Kalita, J. M.
    Chithambo, M. L.
    RADIATION PROTECTION DOSIMETRY, 2017, 177 (03) : 261 - 271
  • [24] Sintering of α-Al2O3-seeded nanocrystalline γ-Al2O3 powders
    Nordahl, CS
    Messing, GL
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (04) : 415 - 422
  • [25] A Comparative Study of Double Layers Al2O3/Al2O3 and Al2O3 /SiO2 Prepared By Microwave and Natural Drying
    Ismail, N. F.
    Harun, Z.
    Badarulzaman, N. A.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2012, 4 (01): : 16 - 21
  • [26] EFFECT OF NANO PARTICLE Al2O3 ADDITION AND HEAT TREATMENT TO PROPERTIES OF SQUEEZE CASTED COMPOSITE AL2024/Al2O3 FOR BALLISTIC APPLICATION
    Tantiarini
    Syahrial, Anne Zulfia
    SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY, 2022, 29 (02):
  • [27] Mechanical Properties of Al2024/Al2O3/MgO/Graphite composites via hydro-thermal hot pressing route
    Ovali, Ismail
    Esen, Cemal
    Albayrak, Sevda
    Karakoc, Halil
    Kumar, M. Saravana
    Yang, Che-Hua
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 302
  • [28] VIBRATORY COMMINUTION OF AL2O3 POWDERS
    DABIZHA, AA
    IVANOVA, LP
    KOTLYAROV, VA
    MOISEEV, VV
    PANOV, IP
    PETROPAVLOVSKAYA, GA
    SOVIET POWDER METALLURGY AND METAL CERAMICS, 1990, 29 (08): : 595 - 598
  • [29] Influence of characteristics of Al2O3 powders on the sintering performance of β double prime -Al2O3
    Chen, Kungang
    Lin, Zuxiang
    Xu, Xiaohe
    Li, Xiangting
    Wuji Cailiao Xuebao/Journal of Inorganic Materials, 1997, 12 (03): : 327 - 330
  • [30] Synthesis of β"-Al2O3 polymer precursor and its pyrolysis to ultrafine β"-Al2O3 powders
    Treadwell, DR
    Sutorik, AC
    Neo, SS
    Laine, RM
    Svedberg, RC
    IECEC-97 - PROCEEDINGS OF THE THIRTY-SECOND INTERSOCIETY ENERGY CONVERSION ENGINEERING CONFERENCE, VOLS 1-4: VOL.1: AEROSPACE POWER SYSTEMS AND TECHNOL; VOL 2: ELECTROCHEMICAL TECHNOL, CONVERSION TECHNOL, THERMAL MANAGEMENT; VOLS 3: ENERGY SYSTEMS, RENEWABLE ENERGY RESOURCES, ENVIRONMENTAL IMPACT, POLICY IMPACTS ON ENERGY; VOL 4: POST DEADLINE PAPERS, INDEX, 1997, : 1214 - 1219
12345