Densification of Al-2024 and Al-2024/Al2O3 Powders by Conventional P/M Route and ECAP: A Comparative Study

被引：0
|
作者：
Nishtha Gupta
B. Ravisankar
S. Kumaran
T. Srinivasa Rao
机构：
[1] National Institute of Technology,Department of Metallurgical and Materials Engineering
[2] National Institute of Technology,undefined
来源：
Transactions of the Indian Institute of Metals | 2012年 / 65卷
关键词：
Al-2024, Al-2024 composites; Back pressure ECAP; Nano indentation; Mechanical alloying;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, mechanically alloyed Al-2024 and Al-2024/Al2O3 powders are densified by conventional sintering and by equal channel angular pressing (ECAP) with and without back pressure. The powder was encapsulated in an aluminium can for consolidation through ECAP. The properties obtained in the compacts by conventional sintering route and by ECAP are compared. The effect of conventional sintering and ECAP on consolidation behaviour of powder, microstructure, density and hardness is discussed. Room temperature back pressure aided ECAP results in nearly full denser (97 % of its theoretical density) compact at room temperature. Nano Indentation technique was used to determine the modulus of the consolidated compacts.
引用
收藏
页码：381 / 386
页数：5
相关论文
共 50 条
  • [1] Densification of Al-2024 and Al-2024/Al2O3 Powders by Conventional P/M Route and ECAP: A Comparative Study
    Gupta, Nishtha
    Ravisankar, B.
    Kumaran, S.
    Rao, T. Srinivasa
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2012, 65 (04) : 381 - 386
  • [2] Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route
    Rahimi, Behnam
    Khosravi, Hamed
    Haddad-Sabzevar, Mohsen
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2015, 22 (01) : 59 - 67
  • [3] Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route
    Behnam Rahimi
    Hamed Khosravi
    Mohsen Haddad-Sabzevar
    International Journal of Minerals, Metallurgy, and Materials, 2015, 22 : 59 - 67
  • [4] Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route
    Behnam Rahimi
    Hamed Khosravi
    Mohsen Haddad-Sabzevar
    InternationalJournalofMineralsMetallurgyandMaterials, 2015, 22 (01) : 59 - 67
  • [5] Effect of mechanical alloying time and rotation speed on evolution of CNTs/Al-2024 composite powders
    Hao, Xiao-ning
    Zhang, Hai-ping
    Zheng, Rui-xiao
    Zhang, Yi-tan
    Ameyama, Kei
    Ma, Chao-li
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (07) : 2380 - 2386
  • [6] Comparative Study of Corrosion Protection of Sol-Gel Coatings with Different Organic Functionality on Al-2024 substrate
    Bera, Saheli
    Rout, T. K.
    Udayabhanu, G.
    Narayan, R.
    PROGRESS IN ORGANIC COATINGS, 2015, 88 : 293 - 303
  • [7] Microstructure and wear behavior of Al2024/SiFe and Al2024/SiFe/Al2O3 composites
    Korkut, MH
    TRIBOLOGY INTERNATIONAL, 2003, 36 (03) : 169 - 180
  • [8] HRTEM Study of Interface Structure in Al2O3/2024Al Composite
    Bai Pucun
    Pei Jie
    Dai Xiongjie
    Zhao Chunwang
    Xing Yongming
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 1 - 5
  • [9] Casting of 2024-Al alloy reinforced with Al2O3 particles
    AbdelAzim, AN
    Shash, Y
    Mostafa, SF
    Younan, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 55 (3-4) : 199 - 205
  • [10] Poly(O-anisi ine) coatings electrodeposited onto AL-2024:: Synthesis, characterization, and corrosion protection evaluation
    Shah, K
    Iroh, J
    ADVANCES IN POLYMER TECHNOLOGY, 2004, 23 (04) : 291 - 297
12345