Effect of Oxygen Pressure on Thermoelectric Properties of p-Type CuAlO2 Films Fabricated by Pulsed Laser Deposition

被引：0
|
作者：
Shrikant Saini
Paolo Mele
Shunsuke Osugi
Malik I. Adam
机构：
[1] Muroran Institute of Technology,Research Center for Environmentally Friendly Materials Engineering
[2] Shibaura Institute of Technology,SIT Research Laboratories
[3] Muroran Institute of Technology,Division of Production Systems Engineering
[4] University of Malaya,Department of Mechanical Engineering
来源：
Journal of Materials Engineering and Performance | 2018年 / 27卷
关键词：
CuAlO; heat harvesting; oxides; pulsed laser deposition; thermoelectrics; thin films;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
We focus on the growth of p-type CuAlO2 thin films and its thermoelectric properties. Thin films are deposited by pulsed laser deposition technique on single-crystal sapphire substrates varying the oxygen partial pressure. Thin film deposited at oxygen partial pressure of 200 mTorr presents bigger grains (about 10 μm in size) and shows Seebeck coefficient as high as 270 µV/K with a conductivity of about 0.8 S/cm so that its power factor is about 5.7 µW/mK2 at 800 K, twice than observed in the film deposited at 60 mTorr of oxygen.
引用
收藏
页码：6286 / 6290
页数：4
相关论文
共 50 条
  • [21] P-type transparent conductive CuAlO2 thin films prepared using atmospheric pressure plasma annealing
    Chen, Hong-Ying
    Ou, Jian-Hong
    MATERIALS LETTERS, 2018, 228 : 81 - 84
  • [22] Growth and chemical substitution of transparent p-type CuAlO2
    Stauber, RE
    Parilla, PA
    Perkins, JD
    Ginley, DS
    MATERIALS SCIENCE OF NOVEL OXIDE-BASED ELECTRONICS, 2000, 623 : 265 - 270
  • [23] Effect of pH on structural and morphological properties of spray deposited p-type transparent conducting oxide CuAlO2 thin films
    Singh, Madhav
    Rao, A. Ranga
    Dutta, Viresh
    MATERIALS LETTERS, 2008, 62 (21-22) : 3613 - 3616
  • [24] Thin film growth of transparent p-type CuAlO2
    Stauber, RE
    Perkins, JD
    Parilla, PA
    Ginley, DS
    ELECTROCHEMICAL AND SOLID STATE LETTERS, 1999, 2 (12) : 654 - 656
  • [25] Improvement of Thermoelectric Properties of CuAlO2 by Excess Oxygen Doping in Annealing
    Lu, Yun
    Maeda, Kazunari
    Sagara, Katauhiro
    Hao, Liang
    Jin, Yingrong
    ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, (IFAMST-8), 2013, 750 : 134 - +
  • [26] Role of oxygen in structural properties of annealed CuAlO2 films
    Lan, W.
    Pan, J. Q.
    Zhu, C. Q.
    Wang, G. Q.
    Su, Q.
    Liu, X. Q.
    Xie, E. Q.
    Yan, H.
    JOURNAL OF CRYSTAL GROWTH, 2011, 314 (01) : 370 - 373
  • [27] Optical and electrical properties of p-type transparent conducting CuAlO2 thin film
    Kim, D. S.
    Park, S. J.
    Jeong, E. K.
    Lee, H. K.
    Choi, S. Y.
    THIN SOLID FILMS, 2007, 515 (12) : 5103 - 5108
  • [28] Preparation of p-type transparent conducting CuAlO2 thin films by reactive DC sputtering
    Banerjee, AN
    Maity, R
    Chattopadhyay, KK
    MATERIALS LETTERS, 2004, 58 (1-2) : 10 - 13
  • [29] Growth of p-type ZnOS films by pulsed laser deposition
    Kobayashi, Kenkichiro
    Ohtsuki, Tohru
    Tomita, Yasumasa
    Kohno, Yosiumi
    Maeda, Yasuhisa
    Matsushima, Shigenori
    JOURNAL OF CRYSTAL GROWTH, 2017, 457 : 289 - 293
  • [30] Pulsed laser deposition of p-type α-AgGaO2 thin films
    Vanaja, K. A.
    Ajimsha, R. S.
    Asha, A. S.
    RajeevKumar, K.
    Jayaraj, M. K.
    THIN SOLID FILMS, 2008, 516 (07) : 1426 - 1430
12345