Mechanical Characteristics of Welded Joints of Aluminum Alloy 6061 T6 Formed by Arc and Friction Stir Welding

被引：0
|
作者：
A. Astarita
A. Squillace
L. Nele
机构：
[1] Engineering University of Naples “Federico II,Department of Chemical, Materials and Industrial Production
[2] ”,undefined
来源：
Metal Science and Heat Treatment | 2016年 / 57卷
关键词：
aluminum alloy; welded joints; heat treatment; tungsten inert gas welding; friction stir welding;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Butt welds formed by arc welding in inert gas with nonconsumable electrode (tungsten inert gas (TIG) welding) and by friction stir welding (FSW) from aluminum alloy AA6061 T6 are studied. Comparative analysis of the structures and mechanical properties of the welded joints is performed using the results of optical and electron microscopy, tensile tests, tests for residual bending ductility, and measurements of microhardness. The changes in the microstructure in different zones and the degrees of degradation of the mechanical properties after the welding are determined. It is shown that the size of the tool for the friction stir welding affects the properties of the welds. Quantitative results showing the relation between the microscopic behavior of the alloy and the welding-induced changes in the microstructure are obtained. Friction stir welding is shown to provide higher properties of the welds.
引用
下载
收藏
页码：564 / 569
页数：5
相关论文
共 50 条
  • [31] Effect of welding speed on mechanical properties of bobbin tool friction stir welded 6005A-T6 aluminum alloy joints
    Ji H.
    Deng Y.
    Deng J.
    Xu H.
    Lin S.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (05): : 24 - 29
  • [32] Effect of friction stir welding parameters on properties of AA6061 aluminum alloy butt welded joints
    El-Batahgy, A-M
    Terad, B.
    Omar, A.
    PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 33 - +
  • [33] Thermal and thermo-mechanical modeling of friction stir welding of aluminum alloy 6061-T6
    Chao, Yuh J.
    Qi, Xinhai
    Journal of Materials Processing and Manufacturing Science, 1998, 7 (02): : 215 - 233
  • [34] Thermal and thermo-mechanical modeling of friction stir welding of aluminum alloy 6061-T6
    Chao, YJ
    Qi, XH
    JOURNAL OF MATERIALS PROCESSING & MANUFACTURING SCIENCE, 1998, 7 (02): : 215 - 233
  • [35] Effect of welding speed on microstructure and mechanical properties of self-reacting friction stir welded 6061-T6 aluminum alloy
    Liu, H. J.
    Hou, J. C.
    Guo, H.
    MATERIALS & DESIGN, 2013, 50 : 872 - 878
  • [36] Tensile behavior of friction stir welded AA 6061-T4 aluminum alloy joints
    Heidarzadeh, A.
    Khodaverdizadeh, H.
    Mahmoudi, A.
    Nazari, E.
    MATERIALS & DESIGN, 2012, 37 : 166 - 173
  • [37] Effect of friction stir welding parameters on microstructural characteristics and mechanical properties of 2219-T6 aluminum alloy joints
    Liu, Huijie
    Zhang, Huijie
    Pan, Qing
    Yu, Lei
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2012, 5 (03) : 235 - 241
  • [38] Mechanical and structural evaluation of friction stir welded 6061 aluminium alloy lap joints at different welding speeds
    Gharavi, F.
    Fadaeifard, F.
    Matori, K. A.
    Yunus, R.
    Othman, N. K.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2016, 54 (05): : 351 - 361
  • [39] Effect of friction stir welding parameters on microstructural characteristics and mechanical properties of 2219-T6 aluminum alloy joints
    Huijie Liu
    Huijie Zhang
    Qing Pan
    Lei Yu
    International Journal of Material Forming, 2012, 5 : 235 - 241
  • [40] Fatigue analysis of the friction stir welded AA6061-T6 aluminum alloy
    Jain, Nitesh
    Kumar, Rajesh
    MATERIALS RESEARCH EXPRESS, 2021, 8 (01)
12345