A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces

被引：0
|
作者：
Mahfoud Herraz
Jean-Max Redonnet
Marcel Mongeau
Mohammed Sbihi
机构：
[1] Université de Toulouse,Université Paul Sabatier and Institut Clément Ader
[2] Université de Toulouse,ENAC
来源：
The International Journal of Advanced Manufacturing Technology | 2020年 / 111卷
关键词：
End milling; Free-form surface; Ball-end cutter; Toroidal cutter; Principal components analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
End-milling of free-form surfaces on multi-axis CNC machines are complex and expensive operations involved in the production of many high-value parts, molds and stamping dies. For such operations, the choice of the cutter type to use is very important given the considerable impact of this choice on the quality of the machined surface and the duration of the operation. In this paper, a new method for choosing between ball-end cutter and toroidal cutter is provided. This procedure gives a good hint on the best tool to employ with no need to carry out any machining simulation.
引用
收藏
页码：1425 / 1443
页数：18
相关论文
共 50 条
  • [21] Modeling of ball-end milling cutter deflection-induced machining error
    Zhang, Chen
    Zhou, Laishui
    An, Luling
    Zhou, Rurong
    Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2008, 40 (01): : 94 - 99
  • [22] Dynamics Characteristics of High Speed Ball-end Milling Cutter for Machining Hardened Steel
    Jiang, B.
    Zheng, M. L.
    Zhou, J.
    Xia, D. H.
    MANUFACTURING AUTOMATION TECHNOLOGY DEVELOPMENT, 2011, 455 : 127 - 131
  • [23] Proposal of an evaluation method of variation in tool center points for ball-end milling of free-form surfaces
    Sogabe, Eisuke
    Nakamoto, Keiichi
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2024, 18 (02) : 1 - 11
  • [24] A composite B-spline method for cutter path generation on free-form surfaces
    Zhu Taosheng
    Wong, Y. S.
    Mannan, M. A.
    INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY, 2005, 24 (02) : 83 - 88
  • [25] CNC machine tool surface interpolator for ball-end milling of free-form surfaces
    Lo, CC
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (03): : 307 - 326
  • [26] Cutting Force Modeling and Experimental Study for Ball-End Milling of Free-Form Surfaces
    Lei, Zhaozhao
    Lin, Xiaojun
    Wu, Gang
    Sun, Luzhou
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2021, 2021
  • [27] Computing Cutter Engagement Values in Milling Tessellated Free-Form Surfaces
    Yao, Zhiyang
    Joneja, Ajay
    JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 2010, 10 (04)
  • [28] Dynamic response analysis of a ball-end milling cutter and optimization of the machining parameters for a ruled surface
    Li, Maoyue
    Huang, Jingang
    Ding, Wenbin
    Liu, Xianli
    Li, Lei
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (02) : 588 - 599
  • [29] A method for predicting ball-end cutter milling force and its probabilistic characteristics
    Wang, Changli
    Ding, Pengfei
    Huang, Xianzhen
    Li, Honglei
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2023, 51 (06) : 3416 - 3433
  • [30] A chatter free calibration method for determining cutter runout and cutting force coefficients in ball-end milling
    Yao, Zhen-Qiang
    Liang, Xin-Guang
    Luo, Lei
    Hu, Jun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (09) : 1575 - 1587
12345