Influence of finishing by burnishing on surface characteristics

被引：0

作者：

W. Bouzid Saï

J. L. Lebrun

机构：

[1] Laboratory of Corrosion and Surface Protection,Laboratory of Processes, Materials and Instrumentation

[2] LCSP,undefined

[3] ENIT,undefined

[4] LPMI,undefined

[5] ENSAM,undefined

来源：

Journal of Materials Engineering and Performance | 2003年 / 12卷

关键词：

burnishing; duplex stainless steel; machining; residual stresses; roughness;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The aim of this study was to analyze the evolution of residual stresses, microhardness, and roughness in relation to the finishing process. The x-ray diffraction (XRD) technique was used to determine the residual stresses, which were measured from the surface to the bottom of the machined workpiece. Processes that were studied included turning, grinding, and burnishing. Burnishing was done on a surface that was initially turned, or turned and then ground. A duplex stainless steel was used in this study. This material belongs to a high-strength stainless steel family with high corrosion resistance properties. We noted that the burnishing process produces the best quality of the surface when compared with turning or grinding.

引用

页码：37 / 40

页数：3

共 50 条

[41] Comparison of Burnishing Process with Other Methods of Hole Surface Finishing Processes Applied on Brass Materials
Ovali, Ismail
Akkurt, Adnan
MATERIALS AND MANUFACTURING PROCESSES, 2011, 26 (08) : 1064 - 1072
[42] The Effects of Burnishing and Conventional Finishing Processes on Surface Roughness and Roundness of the Al 6061 Aluminum Parts
Akkurt, Adnan
Ovali, Ismail
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2009, 15 (03): : 371 - 382
[43] Driven rotary tool burnishing with coated carbide tool-influence of tool surface characteristics on burnished surface characteristics and clarification of tool wear behavior
Okada M.
Shinya M.
Takasugi K.
Tachiya H.
Sasaki T.
Otsu M.
2017, Japan Society for Precision Engineering (83): : 694 - 700
[44] Automated surface finishing of plastic injection mold steel with spherical grinding and ball burnishing processes
Shiou, FJ
Chen, CCA
Li, WT
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 28 (1-2): : 61 - 66
[45] Continuous finishing processes using a combination of burnishing and electrochemical finishing on bore surfaces
Pa, P. S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 49 (1-4): : 147 - 154
[46] Influence of roller burnishing contact width and burnishing orientation on surface quality and tribological behaviour of Aluminium 6061
El-Tayeb, N. S. M.
Low, K. O.
Brevern, P. V.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 186 (1-3) : 272 - 278
[47] Influence of roller burnishing on surface properties and corrosion resistance in steel
Al-Qawabeha, Ubeidulla
Al-Rawajfeh, Aiman Eid
Al-Shamaileh, Ehab
ANTI-CORROSION METHODS AND MATERIALS, 2009, 56 (05) : 261 - 265
[48] Influence of hydrostatic burnishing strategy on the surface topography of martensitic steel
Swirad, S.
Wydrzynski, D.
Nieslony, P.
Krolczyk, G. M.
MEASUREMENT, 2019, 138 : 590 - 601
[49] Influence of Insert Configuration on the Product’s Surface Quality in Burnishing
Smirnov A.V.
Kuznetsov V.A.
Russian Engineering Research, 2018, 38 (11) : 892 - 895
[50] Analysis of Surface Morphology Characteristics in Mechanical Finishing and Electrochemical Mechanical Finishing
Zhen, Hengzhou
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 2681 - 2685

← 1 2 3 4 5 →