Cermet Plasma Coatings with Titanium Carbide

被引：3

作者：

Kalita V.I. ^{[1
]}

Komlev D.I. ^{[1
]}

Pribytkov G.A. ^{[2
]}

Baranovsky A.V. ^{[2
]}

Radyuk A.A. ^{[1
]}

Korzhova V.V. ^{[2
]}

Ivannikov A.Y. ^{[1
]}

Alpatov A.V. ^{[1
]}

Krinitsyn M.G. ^{[2
]}

Mikhaylova A.B. ^{[1
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow

[2] Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, Tomsk

来源：

Inorganic Materials: Applied Research | 2019年 / 10卷 / 03期

基金：

俄罗斯基础研究基金会;

关键词：

and nitrogen in coatings; carbon; cermet S27 + 50 vol % TiC; content of oxygen; microhardness; plasma cermet coatings; S27; alloy;

D O I：

10.1134/S2075113319030134

中图分类号：

学科分类号：

摘要：

Abstract: High-grade iron S27 alloy and cermet S27 + 50 vol % TiC are sprayed in Ar-N2 plasma with local protection from the air with a nozzle application. Under S27 alloy spraying, the oxygen content in the coating increases from 0.32 to 0.98%, the nitrogen content increases from 0.038 to 0.15%, and the carbon content is reduced from 4.26 to 3.47%. In the cermet coatings, the oxygen content increases from 0.56 to 1.96%, the nitrogen content increases from 0.068 to 0.64%, and the carbon content is reduced from 10.5 to 8.19%. Changes in the structure and microhardness of the materials investigated depend on the C, O, and N content and the rate of consolidation of sprayed particles. © 2019, Pleiades Publishing, Ltd.

引用

页码：549 / 555

页数：6

共 50 条

[11] TITANIUM CARBIDE AND ZIRCONIUM CARBIDE COATINGS ON GRAPHITE
BURYKINA, AL
YEVTUSHO.TM
RUSSIAN METALLURGY-METALLY-USSR, 1964, (05): : 104 - &
[12] Cause of formation of pores in titanium carbide based cermet with the addition of zirconium carbide
Terada, Osamu
Saito, Minoru
Suzuki, Hisashi
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1993, 40 (11): : 1131 - 1135
[13] CLADDING OF TITANIUM CARBIDE POWDERS WITH AN NI-FE-P LAYER AND PROPERTIES OF PLASMA COATINGS OF THEM .2. PROPERTIES OF PLASMA COATINGS OF CLAD TITANIUM CARBIDE POWDERS
ANTSIFEROV, VN
SHMAKOV, AM
IVANOVA, MV
POPOV, VV
POWDER METALLURGY AND METAL CERAMICS, 1993, 32 (04) : 326 - 329
[14] Carbide-Based Cermet Plasma Coatings TiC-Cr3C2-WC
Kalita, V. I.
Radyuk, A. A.
Komlev, D. I.
Shamrai, V. F.
Mikhailova, A. B.
Alpatov, A. V.
Titov, D. D.
INORGANIC MATERIALS-APPLIED RESEARCH, 2022, 13 (05) : 1435 - 1445
[15] Carbide-Based Cermet Plasma Coatings TiC–Cr3C2–WC
V. I. Kalita
A. A. Radyuk
D. I. Komlev
V. F. Shamrai
A. B. Mikhailova
A. V. Alpatov
D. D. Titov
Inorganic Materials: Applied Research, 2022, 13 : 1435 - 1445
[16] Heat treatment of combustion synthesized titanium carbide base cermet
Luo, Xuming
Mu, Yufeng
Huang, Jianmin
Zhou, Wei
Lu, Haibo
Zhongnan Gongye Daxue Xuebao/Journal of Central South University of Technology, 1996, 27 (06): : 711 - 714
[17] Cermet Plasma Coatings with TiC and TiCrC Carbides
Kalita, V. I.
Radyuk, A. A.
Komlev, D. I.
Shamrai, V. F.
Mikhailova, A. B.
Alymov, M. I.
Alpatov, A. V.
Titov, D. D.
INORGANIC MATERIALS-APPLIED RESEARCH, 2023, 14 (03) : 707 - 715
[18] WEAR-RESISTANT PLASMA COATINGS BASED ON A DOUBLE CARBIDE OF TITANIUM AND CHROMIUM
RAITSES, VB
LITVIN, VM
RUTBERG, VP
NAGORSKAYA, ZS
BRAZHEVSKII, VP
SOVIET POWDER METALLURGY AND METAL CERAMICS, 1986, 25 (10): : 827 - 828
[19] Titanium carbide-iron composite coatings by reactive plasma spraying of ilmenite
Ananthapadmanabhan, PV
Taylor, PR
JOURNAL OF ALLOYS AND COMPOUNDS, 1999, 287 (1-2) : 121 - 125
[20] TITANIUM TUNGSTEN CARBIDE COATINGS IN DEVELOPMENT
BARRELL, RE
METALLURGIA, 1989, 56 (06): : 249 - &

← 1 2 3 4 5 →