High sensitivity and small size MEMS capacitive microphone using a novel slotted diaphragm

A novel single-chip microelectromechanical systems (MEMS) capacitive microphone with a slotted diaphragm for sound sensing is developed to minimize the microphone size and improve the sensitivity by decreasing the mechanical stiffness of the diaphragm. The behaviors of the microphones with clamped and slotted diaphragms are analyzed using the finite element method (FEM). According to the results, a clamped microphone with a 2.43 × 2.43 mm2 diaphragm and a slotted one with a 1.5 × 1.5 mm2 diaphragm have the same mechanical sensitivity, but the size of slotted microphone is at least 1.62 times smaller than clamped structure. The results also yield a sensitivity of 5.33 × 10−6 pF/Pa for the clamped and 3.87 × 10−5 pF/Pa for the slotted microphone with a 0.5 × 0.5 mm2 diaphragm. The sensitivity of the slotted diaphragm is increased 7.27 times. The pull-in voltage of the clamped microphone is 105 V, and slotted one is 49 V. The pull-in voltage of the slotted microphone is about 53% decreased.