Effect of Annealing Before Aging on Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy

被引：0
|
作者：
Chao Liu
Liang Liu
Jie Zheng
Zhaoming Yan
Zhimin Zhang
Qiang Wang
Xubin Li
Yong Xue
机构：
[1] North University of China,School of Materials Science and Engineering
来源：
Journal of Materials Engineering and Performance | 2022年 / 31卷
关键词：
annealing; aging; Mg-Gd-Y-Zn-Zr; mechanical properties; static recrystallization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, in order to improve the elongation of Mg-9Gd-4Y-2Zn-0.5Zr alloy after aging, annealing treatment was introduced before aging. The alloy billet was subjected to 2 passes of cyclic expansion–extrusion with an asymmetrical cavity (CEE-AEC), then annealed and aged. Static recrystallization occurred during annealing, and the microstructure was refined. After annealing, the elongation of the sample reached the maximum, which is 7.4%, and the peak aging lagged due to dislocation consumption. Compared with the direct aging samples with the lowest elongation, aging after annealing could obtain more comprehensive mechanical properties. The ultimate tensile strength (UTS) was 362 MPa, and the elongation was 2.1%.
引用
收藏
页码：9829 / 9838
页数：9
相关论文
共 50 条
  • [41] Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn-Zr alloys filled with intragranular LPSO phases
    Zhou, Xiaojie
    Liu, Chuming
    Gao, Yonghao
    Jiang, Shunong
    Liu, Wenhui
    Lu, Liwei
    MATERIALS CHARACTERIZATION, 2018, 135 : 76 - 83
  • [42] Effect of ageing treatment on the precipitation behaviour of Mg-Gd-Y-Zn-Zr alloy
    Xu, C.
    Zheng, M. Y.
    Wu, K.
    Wang, E. D.
    Fan, G. H.
    Xu, S. W.
    Kamado, S.
    Liu, X. D.
    Wang, G. J.
    Lv, X. Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 550 : 50 - 56
  • [43] Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer wire arc additive manufacturing
    Bai, Peikang
    Wang, Jie
    Zhao, Zhanyong
    Du, Wenbo
    Tie, Di
    Cai, Chao
    Zhang, Ruize
    Wang, Fude
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 5805 - 5821
  • [44] Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy sheets processed by combined processes of extrusion, hot rolling and ageing
    Xu, C.
    Zheng, M. Y.
    Xu, S. W.
    Wu, K.
    Wang, E. D.
    Fan, G. H.
    Kamado, S.
    Liu, X. D.
    Wang, G. J.
    Lv, X. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 844 - 851
  • [45] Effect of temperature on the microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy during the large height-to-diameter ratio upsetting and extrusion
    Zhang, Mengxian
    Wang, Zixuan
    Zhang, Zhimin
    Xue, Yong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 8036 - 8047
  • [46] The effect of pre-heat parameters and final-heat parameters on microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Dong, Beibei
    Nie, Yangjunfeng
    Liu, Liang
    Zhang, Huifang
    Cheng, Mei
    Xue, Yong
    Zhang, Zhimin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 535 - 547
  • [47] The effect of LPSO on the deformation mechanism of Mg-Gd-Y-Zn-Zr magnesium alloy
    Shao, Jianbo
    Chen, Zhiyong
    Chen, Tao
    Hu, Zhang
    Zhou, Xiaojie
    Liu, Chuming
    JOURNAL OF MAGNESIUM AND ALLOYS, 2016, 4 (02) : 83 - 88
  • [48] Effect of selective oxidation on corrosion behavior of Mg-Gd-Y-Zn-Zr alloy
    Wu, Luoyi
    Li, Haotian
    CORROSION SCIENCE, 2018, 142 : 238 - 248
  • [49] Influence of temperature and cumulative strain on microstructure and mechanical properties of multi-directional forged Mg-Gd-Y-Zn-Zr alloy
    Xia, Xiangsheng
    Guo, Yiwen
    Li, Ming
    Gao, Shiqing
    Xiang, Lin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 2458 - 2466
  • [50] Microstructure and mechanical properties of extruded Mg–Gd–Y–Zn alloy with Mn or Zr addition
    C. Xu
    T. Nakata
    G. H. Fan
    X. W. Li
    G. Z. Tang
    L. Geng
    S. Kamado
    Journal of Materials Science, 2019, 54 : 10473 - 10488
12345