Optimization of process parameters for surface roughness and microhardness in dry milling of magnesium alloy using Taguchi with grey relational analysis

被引：1
|
作者：
Kaining Shi
Dinghua Zhang
Junxue Ren
机构：
[1] Northwestern Polytechnical University (NWPU),The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education
来源：
The International Journal of Advanced Manufacturing Technology | 2015年 / 81卷
关键词：
Magnesium alloy; Milling; Surface roughness; Microhardness; Taguchi method; Grey relational analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, Taguchi with grey relational analysis of experimental data was carried out to determine an optimum combination of process parameters for promoting the surface roughness and the microhardness of dry milling magnesium alloy. According to Taguchi’s signal-to-noise ratio, the optimal process parameters were obtained for desired surface roughness and microhardness, respectively. Moreover, in order to achieve an improved surface quality, the optimum combination of process parameters was determined by grey relational grade. The analysis of variance for grey relational grade showed that feed rate was the most dominant factor influencing surface integrity in milling of magnesium alloy. Finally, the optimum combination of process parameters were validated by confirmation experiments that yield substantially improved multiple quality characteristics. The outcome of the confirmation experiment indicated that the Taguchi with grey relational analysis is an effective method to determine available cutting parameters for a desired surface quality for milling magnesium alloy under dry condition.
引用
收藏
页码：645 / 651
页数：6
相关论文
共 50 条
  • [41] Multi-response Optimization of FDM Process Parameters Using Taguchi Based Grey Relational Analysis Method
    Muhamedagic, Kenan
    Cekic, Ahmet
    Begic-Hajdarevic, Derzija
    Ramljak, Amina
    NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VI, VOL 1, 2023, 687 : 241 - 248
  • [42] Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis
    Jomaa, Walid
    Levesque, Julie
    Bocher, Philippe
    Divialle, Arnaud
    Gakwaya, Augustin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (1-4): : 931 - 942
  • [43] Optimization of plasma arc welding parameters by using the Taguchi method with the grey relational analysis
    Hsiao, Y. F.
    Tarng, Y. S.
    Huang, W. J.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (01) : 51 - 58
  • [44] Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating
    Raghavendra, C. R.
    Basavarajappa, S.
    Sogalad, Irappa
    JOURNAL OF THE INDIAN CHEMICAL SOCIETY, 2021, 98 (10)
  • [45] Investigation of process parameters of ultrasonic welding of copper using Taguchi and grey relational analysis
    Siddani, Jush Kumar
    Srinvas, C.
    Reddy, N. Madan Mohan
    Naik, L. Srinvias
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 827 - 831
  • [46] Multi response optimization of EDM process parameters for biodegradable AZ31 magnesium alloy using TOPSIS and grey relational analysis
    Somasundaram, M.
    Kumar, J. Pradeep
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2022, 47 (03):
  • [47] Multi response optimization of EDM process parameters for biodegradable AZ31 magnesium alloy using TOPSIS and grey relational analysis
    M Somasundaram
    J Pradeep Kumar
    Sādhanā, 47
  • [48] OPTIMIZATION OF THE PROCESS PARAMETERS FOR DRY-SLIDING WEAR OF AN Al 2219-SiCp COMPOSITE USING THE TAGUCHI-BASED GREY RELATIONAL ANALYSIS
    Ganesh, Radhakrishnan
    Chandrasekaran, Kesavan
    Ameen, Mohammed
    Kumar, Raja Pavan
    MATERIALI IN TEHNOLOGIJE, 2014, 48 (03): : 361 - 366
  • [49] Optimization of reaming process parameters for alloy grey cast iron HT250 using grey relational analysis
    Ye C.
    Shi X.R.
    Chen L.
    Wang Y.G.
    Key Engineering Materials, 2020, 866 : 32 - 41
  • [50] Process parameters optimization on machining force and delamination factor in milling of GFRP composites using grey relational analysis
    Jenarthanan, M. P.
    Naresh, N.
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2015, 22 (03) : 313 - 320
12345