Deformation of the Shell of the Cylindrical Cryogenic Tank during its Filling

被引：0
|
作者：
Zarubin V.S. [1 ]
Zimin V.N. [1 ]
Kuvyrkin G.N. [1 ]
机构：
[1] Bauman Moscow State Technical University, ul. 2ya Baumanskaya 5, Moscow
来源：
Russian Aeronautics | 2019年 / 62卷 / 03期
关键词：
axial-symmetric deformation; cryogenic tank; edge effect; long cylindrical shell; mathematical model; quasi-stationary temperature distribution; stringer; temperature stresses;
D O I：
10.3103/S1068799819030024
中图分类号：
学科分类号：
摘要：
A complex mathematical model of the thermo-deformed state of a circular cylindrical shell reinforced by stringers for a vertically installed cryogenic tank during its filling was constructed. The model describes the local deviation of the shell generatrix due to the nonuniform temperature distribution and the action of an axial compressive load. Relations describing the temperature distribution along the shell and its radial displacement were obtained. The quantitative analysis of these relations was carried out. Estimations of the shell generating line deviation from the original rectilinear form, which can decrease the level of the critical axial loads and cause the shell buckling, are presented. © 2019, Allerton Press, Inc.
引用
收藏
页码：364 / 372
页数：8
相关论文
共 50 条
  • [31] Transient Deformation of an Anisotropic Cylindrical Shell with Structural Features
    Lokteva N.A.
    Serdyuk D.O.
    Skopintsev P.D.
    Journal of The Institution of Engineers (India): Series C, 2023, 104 (02) : 455 - 466
  • [32] Structural optimal design for integrated stiffened cylindrical shell of fuel tank
    Zhou, Sida
    Liu, Li
    Zhu, Huaguang
    Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2010, 42 (03): : 363 - 368
  • [33] Buckling strength of the cylindrical shell and tank subjected to axially compressive loads
    Kim, SE
    Kim, CS
    THIN-WALLED STRUCTURES, 2002, 40 (04) : 329 - 353
  • [34] Stresses in the zone of process openings in the shell of a vertical cylindrical steel tank
    Ziolko, Jerzy
    Supernak, Ewa
    Mikulski, Tomasz
    STEEL CONSTRUCTION-DESIGN AND RESEARCH, 2010, 3 (01): : 42 - 48
  • [35] PLASTIC-DEFORMATION OF A CYLINDRICAL-SHELL DURING REDUCTION BY AN IMPULSIVE PRESSURE ON A GROOVED MANDREL
    KOLESNIKOV, SM
    KOSTRIK, VK
    SERDYUK, VS
    SOVIET APPLIED MECHANICS, 1984, 20 (04): : 322 - 328
  • [36] Experimental study on the deformation and damage of cylindrical shell-water-cylindrical shell structures subjected to underwater explosion
    Wu, Jianyu
    Chong, Ji
    Long, Yuan
    Zhou, You
    Yu, Yang
    Liu, Jianfeng
    THIN-WALLED STRUCTURES, 2018, 127 : 654 - 665
  • [37] VIBRATIONS OF AN ACOUSTIC MEDIUM IN A CYLINDRICAL CAVITY DURING NONSTATIONARY DEFORMATION OF ITS SURFACE
    GOLOVKIN, AP
    LOBYSEV, VL
    MIKHAILOV, AA
    SOVIET APPLIED MECHANICS, 1989, 25 (12): : 1212 - 1221
  • [38] Influence of filling methods on the cool down performance and induced thermal stress distribution in cryogenic tank
    Zhu, Kang
    Li, Yanzhong
    Ma, Yuan
    Wang, Jiaojiao
    Wang, Lei
    Xie, Fushou
    APPLIED THERMAL ENGINEERING, 2018, 141 : 1009 - 1019
  • [39] Registration of displacement and visualization of the deformation field of a cylindrical shell under its shock-wave loading
    Gerasimov S.I.
    Totyshev K.V.
    Trepalov N.A.
    Gerasimova R.V.
    Scientific Visualization, 2021, 13 (03): : 115 - 124
  • [40] DEFORMATION OF A CYLINDRICAL-SHELL WITH 2 CANTILEVER ELASTIC PLATES
    ANTUFYEV, BA
    IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII AVIATSIONAYA TEKHNIKA, 1983, (04): : 80 - 82
12345