Deformation of the Shell of the Cylindrical Cryogenic Tank during its Filling

被引：0
|
作者：
Zarubin V.S. [1 ]
Zimin V.N. [1 ]
Kuvyrkin G.N. [1 ]
机构：
[1] Bauman Moscow State Technical University, ul. 2ya Baumanskaya 5, Moscow
来源：
Russian Aeronautics | 2019年 / 62卷 / 03期
关键词：
axial-symmetric deformation; cryogenic tank; edge effect; long cylindrical shell; mathematical model; quasi-stationary temperature distribution; stringer; temperature stresses;
D O I：
10.3103/S1068799819030024
中图分类号：
学科分类号：
摘要：
A complex mathematical model of the thermo-deformed state of a circular cylindrical shell reinforced by stringers for a vertically installed cryogenic tank during its filling was constructed. The model describes the local deviation of the shell generatrix due to the nonuniform temperature distribution and the action of an axial compressive load. Relations describing the temperature distribution along the shell and its radial displacement were obtained. The quantitative analysis of these relations was carried out. Estimations of the shell generating line deviation from the original rectilinear form, which can decrease the level of the critical axial loads and cause the shell buckling, are presented. © 2019, Allerton Press, Inc.
引用
收藏
页码：364 / 372
页数：8
相关论文
共 50 条
  • [1] Dynamic Distribution of Electrostatic Potential in Vertical Cylindrical Oil Tank During Filling
    Wang L.-W.
    Chen G.-H.
    1600, South China University of Technology (45): : 8 - 14
  • [2] Computational Studies of the Recondensation Process in a Tank with a Cryogenic Filling
    Marakhova, E. A.
    Shimanova, A. B.
    Uglanov, D. A.
    Adenane, H.
    2021 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND AUTOMATION (ICMEAS 2021), 2021, : 77 - 80
  • [3] Pinching an open cylindrical shell: Extended deformation and its persistence
    Matsumoto, Daichi
    Sano, Tomohiko G.
    Wada, Hirofumi
    EPL, 2018, 123 (01)
  • [4] Analysis of steel tank shell deformation and its impact on further utilisation
    Kus, Juliusz
    Walach, Sylwester
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 193
  • [5] CONTRIBUTION OF THE BENDING STIFFNESS OF THE TANK BOTTOM PLATE AND OUT-OF-ROUND DEFORMATION OF CYLINDRICAL SHELL TO THE TANK ROCKING MOTION
    Taniguchi, Tomoyo
    Nakashima, Teruhiro
    Yoshida, Yuuichi
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 8, 2017,
  • [6] Deformation and fracture behaviors of cylindrical battery shell during thermal runaway
    Jia, Yikai
    Darst, John
    Surelia, Amul
    Delafuente, David
    Finegan, Donal P.
    Xu, Jun
    JOURNAL OF POWER SOURCES, 2022, 539
  • [7] Investigation of the chill-down behavior and thermal stress distribution of a cryogenic tank during the filling process
    Zhu Kang
    Li Yanzhong
    Xu Mengjian
    Wang Lei
    PROCEEDINGS OF THE 25TH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2014, 2015, 67 : 342 - 347
  • [8] SIMPLIFIED ROCKING MODEL OF UNANCHORED CYLINDRICAL TANK INCLUDING BASEPLATE UPLIFT AND CROSS SECTIONAL DEFORMATION OF TANK SHELL DUE TO SEISMIC LOAD
    Kobayashi, Nobuyuki
    Tashita, Toshiki
    Takizawa, Sho
    Taniguchi, Tomoyo
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 8, 2015,
  • [9] Control of the Deformation of a Circular Cylindrical Shell
    Dolgikh, L. D.
    Kiselev, V. V.
    MECHANICS OF SOLIDS, 2019, 54 (08) : 1171 - 1181
  • [10] Control of the Deformation of a Circular Cylindrical Shell
    L. D. Dolgikh
    V. V. Kiselev
    Mechanics of Solids, 2019, 54 : 1171 - 1181
12345