Simulation of Impulse Resistance Welding for Thermoplastic Matrix Composites

被引：0
|
作者：
Christophe Ageorges
Lin Ye
机构：
[1] The University of Sydney,Centre for Advanced Materials Technology, Department of Mechanical & Mechatronic Engineering
来源：
Applied Composite Materials | 2001年 / 8卷
关键词：
impulse resistance welding; heat transfer; consolidation; processing window; APC-2; CF-PEEK composites;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The impulse resistance welding (IRW) process is modelled using a three-dimensional transient finite element model (FEM) featuring heat transfer and consolidation. The welding of single lap joints is simulated for APC-2 laminates, with additional PEEK film inserted at the welding interface. The effects of the power signal on (a) temperature uniformity in the welding interface and (b) processing times are investigated. Two welding configurations are evaluated; in the first one, the heating element outside the welding stack is left in-air, while in the second case, it is embedded in a conductive medium in order to improve temperature homogeneity within the welding interface. Based on criteria of consolidation and thermal degradation, optimum processing windows were simulated.
引用
收藏
页码：133 / 147
页数：14
相关论文
共 50 条
  • [1] Simulation of impulse resistance welding for thermoplastic matrix composites
    Ageorges, C
    Ye, L
    [J]. APPLIED COMPOSITE MATERIALS, 2001, 8 (02) : 133 - 147
  • [2] Resistance welding of thermoplastic composites
    Yousefpour, A
    Simard, M
    Octeau, MA
    Laramée, M
    Hojjati, M
    [J]. Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace, 2004, : 225 - 238
  • [3] Resistance welding of thermoplastic composites - an overview
    Stavrov, D
    Bersee, HEN
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (01) : 39 - 54
  • [4] Characterization of metal heating elements for resistance welding of thermoplastic matrix composites (PEEK)
    Gonzalez, I.
    Sanz, A.
    Fernandez, A.
    [J]. ADVANCES IN MATERIALS PROCESSING TECHNOLOGIES-MESIC V, 2014, 797 : 99 - 104
  • [5] Resistance welding of thermoplastic composites skin/stringer joints
    Dube, M.
    Hubert, P.
    Yousefpour, A.
    Denault, J.
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (12) : 2541 - 2552
  • [6] Resistance welding of thermoplastic composites with a nanocomposite heating element
    Brassard, David
    Dube, Martine
    Tavares, Jason R.
    [J]. COMPOSITES PART B-ENGINEERING, 2019, 165 : 779 - 784
  • [7] Process Modeling and optimization of resistance welding for thermoplastic composites
    Colak, ZS
    Sonmez, FO
    Kalenderoglu, V
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2002, 36 (06) : 721 - 744
  • [8] Vibration welding of continuous-fiber thermoplastic matrix composites
    Jandali, G
    Mallick, PK
    [J]. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2004, 17 (04) : 343 - 358
  • [9] A novel method for reducing the welding pressure requirement in resistance welding of thermoplastic composites
    Ma, Zhongwei
    Xu, Zhiwu
    Li, Zhengwei
    Chen, Shu
    Wu, You
    Zhang, He
    Yan, Jiuchun
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2024, 258
  • [10] Modelling resistance welding of thermoplastic composites with a nanocomposite heating element
    Brassard, David
    Dube, Martine
    Tavares, Jason R.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (05) : 625 - 639
12345