Analysis of load test on composite I-girder bridge

This paper showcases the importance of field testing in efforts to deal with the deteriorating infrastructure. It shows that when tested, bridges do not necessarily behave as expected under load, particularly with respect to boundary conditions. This is demonstrated via a load test performed on a healthy but ageing composite reinforced concrete bridge in Exeter, UK. The bridge girders were instrumented with strain transducers and static strains were recorded while a four-axle, 32 tonne lorry remained stationary in a single lane. Subsequently, a 3-D finite element model of the bridge was developed and calibrated based on the field test data. The bridge deck was originally designed as simply supported, however, it is shown (from the field test and calibrated model) that the support conditions were no longer behaving as pin-roller which affects the load distribution characteristics of the superstructure. Transverse load distribution factors (DFs) of the bridge deck structure were studied for different boundary conditions. The DFs obtained from analysis were compared with DFs provided in Design Manual for Roads and Bridges (DMRB) Standard Specification. Having observed in the load test that the ends of the deck appeared to be experiencing some rotational restraint, a parametric study was carried out to calculate mid-span bending moment (under DMRB assessment loading) for varying levels of restraint at the end of the deck.