Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests

被引:0
|
作者
M. M. Arouche
S. Budhe
L. A. Alves
S. Teixeira de Freitas
M. D. Banea
S. de Barros
机构
[1] CEFET/RJ,Institut de Recherche en Génie Civil et Mécanique
[2] Federal Center of Technological Education,undefined
[3] Delft University of Technology,undefined
[4] Université de Nantes,undefined
关键词
Adhesively bonded joints; Peel tests; Moisture; CFRP; Salt water;
D O I
暂无
中图分类号
学科分类号
摘要
In this work, an experimental study has been carried out to evaluate the effect of salt water condition on the long-term adhesion of composite-to-metal bonded joints using peel tests. A new test configuration is tested via fully and partially immersed specimens with 500 mm length. Fracture surfaces of non-aged samples exhibited a cohesive failure within the adhesive layer, which indicates a good adhesion of the joint. Results revealed a significant difference in the interface adhesion between aged and non-aged condition after 150 days of immersion. Partially immersed specimens allow to evaluate the adhesion performance of the joint under dry and wet condition in single specimen using a simple peel test.
引用
收藏
相关论文
共 50 条
  • [31] Mixed-Mode Debonding in CFRP-to-Steel Fiber-Reinforced Concrete Joints
    Zhang, Wei
    Kang, Shuaiwen
    Lin, Benqing
    Huang, Yiqun
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2024, 28 (01)
  • [32] On factors affecting CFRP-steel bonded joints
    Silva, Manuel A. G.
    Biscaia, Hugo
    Ribeiro, Pedro
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 226 : 360 - 375
  • [33] The effect of fatigue loading on bond strength of CFRP bonded steel plate joints
    Liu, HB
    Zhao, XL
    Al-Mahaidi, R
    BOND BEHAVIOUR OF FRP IN STRUCTURES: PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM BBFS 2005, 2005, : 459 - 464
  • [34] Effect of Impact Tensile Load on Strength of CFRP Bonded Steel Plate Joints
    Al-Zubaidy, H. A.
    Zhao, X. L.
    Al-Mahaidi, R.
    PROCEEDINGS OF THE TWELFTH EAST ASIA-PACIFIC CONFERENCE ON STRUCTURAL ENGINEERING AND CONSTRUCTION (EASEC12), 2011, 14 : 1312 - 1317
  • [35] Effect of nanofillers on adhesion strength of steel joints bonded with acrylic adhesives
    Yadollahi, M.
    Barkhordari, S.
    Gholamali, I.
    Farhoudian, S.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2015, 20 (05) : 443 - 450
  • [36] Cohesive zone model prediction of debonding failure in CFRP-to-steel bonded interface with a ductile adhesive
    Wang, Zhen
    Xian, Guijun
    COMPOSITES SCIENCE AND TECHNOLOGY, 2022, 230
  • [37] Experimental Study on CFRP-to-Steel Bonded Interfaces under Quasi-Static Cyclic Loading
    Doroudi, Y.
    Fernando, D.
    Nguyen, V. T.
    Torres, J. P.
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2019, 23 (04)
  • [38] Effect of carbon nanotube modified epoxy adhesive on CFRP-to-steel interface
    Korayem, Asghar H.
    Li, Chen Yang
    Zhang, Qian Hui
    Zhao, Xiao Ling
    Duan, Wen Hui
    COMPOSITES PART B-ENGINEERING, 2015, 79 : 95 - 104
  • [39] Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates
    Colombi, P
    Poggi, C
    CONSTRUCTION AND BUILDING MATERIALS, 2006, 20 (1-2) : 22 - 33
  • [40] Reliability analysis of adhesively bonded CFRP-to-steel double lap shear joint with thin outer adherends
    Liu, Meng
    Dawood, Mina
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 141 : 52 - 63