On Turbulent Jets Issuing from Notched-Rectangular and Circular Orifice Plates

被引:0
|
作者
Jianchun Mi
P. Kalt
G. J. Nathan
机构
[1] Peking University,State Key Laboratory of Turbulence and Complex Systems and Department of Energy and Resources Engineering, College of Engineering
[2] University of Adelaide,Centre for Energy Technology and School of Mechanical Engineering
来源
关键词
Noncircular jet; Free jet; Turbulence mixing; Axis-switching;
D O I
暂无
中图分类号
学科分类号
摘要
This paper reports an experimental investigation of the near-field flow characteristics of two air/air turbulent jets issuing respectively from notched-rectangular and circular orifice plates with identical opening areas or equivalent diameters (De). Planar particle image velocimetry (PIV) was used to measure the velocity field at the same Reynolds number, based on De, of Re = 72,000. Consistent with previous work on other noncircular jets, the present study finds that the notched jet has a higher rate of mixing than does the circular counterpart. In particular, this jet in the very near field transfers its momentum to the surroundings at a greater rate, evidenced by a notably shorter unmixed core and faster turbulence intensity growth. The higher rates of overall decay and spread of the notched jet are maintained over the entire measurement region and likely beyond. In addition, the phenomenon of axis switching is also found to occur in this jet.
引用
收藏
页码:565 / 582
页数:17
相关论文
共 50 条
  • [21] Flow behaviour of turbulent nozzle jets issuing from bevelled collars
    Zeng, Y.
    New, T. H.
    Chng, T. L.
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2011, 35 (08) : 1555 - 1564
  • [22] Comparison of Turbulent Jets Issuing from Various Sharp Contoured Nozzles
    Aleyasin, Seyed Sobhan
    Fathi, Nima
    Tachie, Mark Francis
    Koupriyanov, Mikhail
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2017, VOL 1C, 2017,
  • [23] NUMERICAL SIMULATION OF A TURBULENT FREE JET ISSUING FROM A RECTANGULAR NOZZLE
    Akbarzadeh, Mohsen
    Birouk, Madjid
    Sarh, Brahim
    COMPUTATIONAL THERMAL SCIENCES, 2012, 4 (01): : 1 - 22
  • [24] Stereoscopic-PIV measurement of turbulent jets issuing from a sharp-edged circular nozzle with multiple triangular tabs
    Sang-Joon Lee
    Young-Gil Jang
    Yong-Seok Choi
    Journal of Mechanical Science and Technology, 2012, 26 : 2765 - 2771
  • [25] Stereoscopic-PIV measurement of turbulent jets issuing from a sharp-edged circular nozzle with multiple triangular tabs
    Lee, Sang-Joon
    Jang, Young-Gil
    Choi, Yong-Seok
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (09) : 2765 - 2771
  • [26] Flow characteristics of sub- and supersonic jets issued from orifice and notched orifice nozzles, and application to ejector
    Shakouchi, Toshihiko
    Tanoue, Tsubasa
    Tsujimoto, Koichi
    Ando, Toshitake
    JOURNAL OF FLUID SCIENCE AND TECHNOLOGY, 2019, 14 (02):
  • [27] Acoustic characteristics of supersonic rectangular jets issuing from nozzles with diagonal expansion ramps
    Bogadi, Surendra
    Sridhar, B. T. N.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 43 (12)
  • [28] Acoustic characteristics of supersonic rectangular jets issuing from nozzles with diagonal expansion ramps
    Surendra Bogadi
    B. T. N. Sridhar
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43
  • [29] Orifice Jet Control Using Sub-Flows Issuing from Circular and Non-Circular Openings
    Mizuki Kito
    Takahiro Fujimatsu
    Kunikazu Kondo
    Flow, Turbulence and Combustion, 2019, 102 : 345 - 353
  • [30] Orifice Jet Control Using Sub-Flows Issuing from Circular and Non-Circular Openings
    Kito, Mizuki
    Fujimatsu, Takahiro
    Kondo, Kunikazu
    FLOW TURBULENCE AND COMBUSTION, 2019, 102 (02) : 345 - 353