Influence of Ni Content on Dry Sliding Wear Behavior of Sintered and Carburized Steels

被引：0
|
作者：
Ibrahim Metinoz
Ilaria Cristofolini
Alberto Molinari
机构：
[1] University of Trento,
来源：
Journal of Materials Engineering and Performance | 2014年 / 23卷
关键词：
corrosion and wear; life prediction; powder metallurgy;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The dry sliding wear behavior of two sintered and carburized steels with different Ni amounts has been investigated. The microstructure of the two steels comprises martensite, bainite, and the Ni-rich austenite. Under the sliding conditions investigated, wear is either oxidative or adhesive. In both cases, the lower amount of the soft Ni-rich austenite results in a better wear resistance. A design procedure for parts subject to dry sliding wear applications is proposed, based on the maximum acceptable wear depth, in order to evaluate the practical significance of the differences between the two materials.
引用
收藏
页码：3630 / 3639
页数：9
相关论文
共 50 条
  • [31] Wear behaviour of sintered bearings using additives in dry sliding
    Gajjal, P. S.
    Lathkar, G. S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 2483 - 2488
  • [32] THE ROLE OF POROSITY IN THE DRY SLIDING WEAR OF A SINTERED FERROUS ALLOY
    DUBRUJEAUD, B
    VARDAVOULIAS, M
    JEANDIN, M
    WEAR, 1994, 174 (1-2) : 155 - 161
  • [33] Influence of Ni Content on the Microstructure and Dry Sliding Wear Properties of Cr13Ni5Si2/γ Intermetallic Alloys
    Y. L. Fang
    H. M. Wang
    Metallurgical and Materials Transactions A, 2007, 38 : 441 - 449
  • [34] Influence of Ni content on the microstructure and dry sliding wear properties of Cr13Ni5Si2/γ intermetallic alloys
    Fang, Y. L.
    Wang, H. M.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (03): : 441 - 449
  • [35] Influence of high frequency quenching on the dry sliding wear properties for FeNiMoCuCr powder sintered steel
    School of Materials Science and Engineering, Changchun University of Technology, Changchun 130012, China
    Jinshu Rechuli, 2006, 12 (43-45):
  • [36] Influence of Tungsten on Dry Sliding Wear Behaviour of Sintered/Hot Extruded P/M Alloy Steels (Fe-C-W-Ti)
    Prabu, S. Senthur
    Prathiba, S.
    Asokan, M. A.
    Sreelekh, M. K.
    Steff, Francis
    Sai, Mounish
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2017, 20 (04): : 1050 - 1056
  • [37] HEAT TREATING OF SINTERED Fe-1.5Mo-0.7C STEELS AND THEIR SLIDING WEAR BEHAVIOR
    J.A.Wang
    Y.He
    H.Danninger
    Acta Metallurgica Sinica(English Letters), 2003, (01) : 51 - 59
  • [38] Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests
    Ceschini, Lorella
    Palombarini, Giuseppe
    Sarnbogna, Giuliano
    Firrao, Donato
    Scavino, Giorgio
    Ubertalli, Graziano
    TRIBOLOGY INTERNATIONAL, 2006, 39 (08) : 748 - 755
  • [39] Sliding wear behavior of cold-sprayed Ni-WC composite coatings: Influence OF WC content
    Alidokht, Sima A.
    Chromik, Richard R.
    WEAR, 2021, 477
  • [40] Dry sliding wear behavior of magnesium alloys
    An, J.
    Li, R. G.
    Lu, Y.
    Chen, C. M.
    Xu, Y.
    Chen, X.
    Wang, L. M.
    WEAR, 2008, 265 (1-2) : 97 - 104
12345