Effect of stress ratio and frequency on fatigue crack growth rate of 2618 aluminium alloy silicon carbide metal matrix composite

被引：0
|
作者：
Nirbhay Singh
Ram Khelawan
G. N. Mathur
机构：
[1] Defence Materials & Stores Research & Development Establishment,
来源：
Bulletin of Materials Science | 2001年 / 24卷
关键词：
aluminium alloy-SiC composite; fatigue crack; stress ratio;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Effect of stress ratio and frequency on the fatigue crack propagation of 2618 aluminium alloy-silicon carbide composite were investigated at ambient temperature. With the first set of specimens, the fatigue crack growth rates were studied at three frequencies of 1 Hz, 5 Hz and 10 Hz at a stress ratio of 0.1 whereas the effects of stress ratios of 0.1, 0.25 and 0.50 were studied with the second set of specimens. The study showed that the fatigue crack propagation behaviour of this metal matrix composite was influenced to an appreciable extent by the stress ratio, but not by the fatigue frequencies used in this investigation.
引用
收藏
页码：169 / 171
页数：2
相关论文
共 50 条
  • [41] EFFECT OF STRESS RATIO ON THE RATE OF GROWTH OF FATIGUE CRACKS IN 1100 A1-ALLOY
    BILIR, OG
    HARUN, M
    ENGINEERING FRACTURE MECHANICS, 1990, 37 (06) : 1203 - 1206
  • [42] Analysis of stir cast aluminium silicon carbide metal matrix composite: A comprehensive review
    Sijo, M. T.
    Jayadevan, K. R.
    INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING, SCIENCE AND TECHNOLOGY (ICETEST - 2015), 2016, 24 : 379 - 385
  • [43] Empirical model for stress ratio effect on fatigue delamination growth rate in composite laminates
    Andersons, J
    Hojo, M
    Ochiai, S
    INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (06) : 597 - 604
  • [44] Effect of grain size on fatigue-crack growth in 2524 aluminium alloy
    Yin, Deyan
    Liu, Huiqun
    Chen, Yuqiang
    Yi, Danqing
    Wang, Bo
    Wang, Bin
    Shen, Fanghua
    Fu, Shang
    Tang, Cong
    Pan, Suping
    INTERNATIONAL JOURNAL OF FATIGUE, 2016, 84 : 9 - 16
  • [45] Effect of heat treatment and cryotreatment on the fatigue crack growth in aluminium 7075 alloy
    Arunakumara P.C.
    Venkatesh D.
    Phaneesh K.R.
    International Journal of Vehicle Structures and Systems, 2020, 12 (04) : 460 - 464
  • [46] Separation of measured fatigue crack stress fields in a metal matrix composite material
    Fitzpatrick, ME
    Hutchings, MT
    Withers, PJ
    ACTA MATERIALIA, 1999, 47 (02) : 585 - 593
  • [47] Stress-level-dependent stress ratio effect on fatigue crack growth
    Sunder, R
    Porter, WJ
    Ashbaugh, NE
    FATIGUE AND FRACTURE MECHANICS: TWENTY-NINTH VOLUME, 1999, 1332 : 426 - 437
  • [48] Stress-level-dependent stress ratio effect on fatigue crack growth
    Sunder, R.
    Porter, W. John
    Ashbaugh, Noel E.
    ASTM Special Technical Publication, 1999, (1332): : 426 - 437
  • [49] Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite
    Shreyas, P. S.
    Shriramkumar, S.
    Sruthisagar, R.
    Ramnath, Vijaya B.
    Elanchezhian, C.
    2ND INTERNATIONAL CONFERENCE ON MECHANICAL, AERONAUTICAL AND AUTOMOTIVE ENGINEERING (ICMAA 2018), 2018, 166
  • [50] Fabrication, Mechanical and Wear Characterization of Silicon Carbide Reinforced Aluminium 7075 Metal Matrix Composite
    Surya, Mulugundam Siva
    Gugulothu, S. K.
    SILICON, 2022, 14 (05) : 2023 - 2032
12345