Fracture behaviour of laminated veneer lumber under Mode I and III loading

被引：0

作者：

K. Frühmann

E. K. Tschegg

C. Dai

S. E. Stanzl-Tschegg

机构：

[1] Christian Doppler Laboratory for Fundamentals of Wood Machining at the Institute of Meteorology and Physics,

[2] University of Agricultural Sciences,undefined

[3] Türkenschanzstraße 18,undefined

[4] 1180 Vienna,undefined

[5] Austria e-mail: Klaus.fruchmann@ifp.tuwien.ac.at,undefined

[6] Intitute of Applied and Technical Physics,undefined

[7] Vienna University of Technology,undefined

[8] Wiedner Hauptstraße 8–10,undefined

[9] 1040 Vienna,undefined

[10] Austria,undefined

[11] Forintek Canada Corp,undefined

[12] 2665 East Mall,undefined

[13] Vancouver,undefined

[14] British Columbia,undefined

[15] Canada,undefined

[16] V6T 1W5,undefined

来源：

Wood Science and Technology | 2002年 / 36卷

关键词：

Crack Initiation; Fiber Orientation; State Crack; Laminate Veneer Lumber; Microstructural Damage;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Mode I and Mode III loading experiments were performed on side grooved CT specimens of two types of Laminated Veneer Lumber (LVL). Steady state crack propagation was maintained in order to detect complete load displacement diagrams. Fracture behaviour and influence of fiber orientation were studied and all important fracture mechanical values (stiffness/compliance, microstructural damage, crack initiation energy, specific fracture energy etc) were determined. Much higher crack initiation energies and specific fracture energies resulted in mode III loading than in mode I loading for both material types. Under external mode III loading, crack initiation occurs in mode III and crack propagation however takes place under mode I owing to crack surface interference. The influence of fiber orientation on fracture mechanical properties of LVL was discussed.

引用

页码：319 / 334

页数：15

共 50 条

[1] Fracture behaviour of laminated veneer lumber under Mode I and III loading
Frühmann, K
Tschegg, EK
Dai, C
Stanzl-Tschegg, SE
WOOD SCIENCE AND TECHNOLOGY, 2002, 36 (04) : 319 - 334
[2] Experimental results of fracture energy and fracture toughness of Radiata Pine laminated veneer lumber (LVL) in mode I (opening)
Ardalany, Manoochehr
Deam, Bruce
Fragiacomo, Massimo
MATERIALS AND STRUCTURES, 2012, 45 (08) : 1189 - 1205
[3] Experimental results of fracture energy and fracture toughness of Radiata Pine laminated veneer lumber (LVL) in mode I (opening)
Manoochehr Ardalany
Bruce Deam
Massimo Fragiacomo
Materials and Structures, 2012, 45 : 1189 - 1205
[4] Mode I delamination R-curve in poplar laminated veneer lumber
Peignon, A.
Serra, J.
Gelard, L.
Cantarel, A.
Eyma, F.
Castanie, B.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 126
[5] Stress distributions and failure types of curved laminated veneer lumber for use in furniture under loading
Zhi-Hui Wu
Takeshi Furuno
Journal of Wood Science, 1999, 45 : 134 - 142
[6] Stress distributions and failure types of curved laminated veneer lumber for use in furniture under loading
Wu, ZH
Furuno, T
JOURNAL OF WOOD SCIENCE, 1999, 45 (02) : 134 - 142
[7] Fracture characteristics of wood under mode I, mode II, and mode III loading
Frühmann, K
Reiterer, A
Tschegg, EK
Stanzl-Tschegg, SS
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 2002, 82 (17-18): : 3289 - 3298
[8] Validation of Method for Estimating Element Strength Distribution of Laminated Veneer Lumber I. Laminating effect in the strength of laminated veneer lumber
Koseki, Makoto
Nakamura, Noboru
MOKUZAI GAKKAISHI, 2015, 61 (02): : 55 - 66
[9] Analysis of the fracture behavior of Radiata Pine timber and Laminated Veneer Lumber
Franke, Bettina
Quenneville, Pierre
ENGINEERING FRACTURE MECHANICS, 2014, 116 : 1 - 12
[10] Influence of Freezing and Thawing on the Structural Behaviour of Laminated Veneer Lumber Beams
Woods, Joshua
Hrap, Vicki
MacDougall, Colin
PROCEEDINGS OF THE CANADIAN SOCIETY FOR CIVIL ENGINEERING ANNUAL CONFERENCE 2023, VOL 13, CSCE 2023, 2024, 507 : 59 - 70

← 1 2 3 4 5 →