A Dislocation Density-Based Model for Analyzing Mechanical Behavior of Dual-Phase Steels

被引：10
|
作者：
Jafari M. [1 ]
Ziaei-Rad S. [1 ]
Torabian N. [1 ]
机构：
[1] Mechanical Engineering Department, Isfahan University of Technology, Isfahan
来源：
Metallography, Microstructure, and Analysis | 2014年 / 3卷 / 3期
关键词：
Dislocation density; Dual-phase steels; Finite element method; Voronoi tessellation;
D O I：
10.1007/s13632-014-0136-6
中图分类号：
学科分类号：
摘要：
The aim of this work is to develop a microstructural analysis of the mechanical behavior of dual-phase steels. Finite element simulations were conducted, and the results were validated by experimental observations. A dislocation density constitutive formulation was used for the ferrite phase, while the Gurson-Tvergaard-Needleman damage model and an elastic-plastic model with isotropic hardening were used for the grain boundaries and martensite, respectively. The deformation and failure behavior of the material predicted by the model developed here showed good agreement with experimental observations. Moreover, the investigation on the effect of grain size and martensite volume fraction revealed that the microstructural inhomogeneity plays an important role in material behavior. © 2014 Springer Science+Business Media New York and ASM International.
引用
收藏
页码：185 / 193
页数：8
相关论文
共 50 条
  • [31] Critical Assessment 33: Dislocation density-based constitutive modelling for steels with austenite
    Kang, Jee-Hyun
    Kim, Sung-Joon
    MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (10) : 1128 - 1132
  • [32] Impact of second phase morphology and orientation on the plastic behavior of dual-phase steels
    Ismail, Karim
    Perlade, Astrid
    Jacques, Pascal J.
    Pardoen, Thomas
    Brassart, Laurence
    INTERNATIONAL JOURNAL OF PLASTICITY, 2019, 118 : 130 - 146
  • [33] Effect of Silicon Content on the Microstructure and Mechanical Properties of Dual-Phase Steels
    Drumond J.
    Girina O.
    da Silva Filho J.F.
    Fonstein N.
    de Oliveira C.A.S.
    Metallography, Microstructure, and Analysis, 2012, 1 (5) : 217 - 223
  • [34] Mechanical behaviour of thermomechanically produced ultrafine grained dual-phase steels
    Gonzalez, R.
    Garcia, J. O.
    Verdeja, L. F.
    Quintana, M. J.
    Verdeja, J. I.
    CANADIAN METALLURGICAL QUARTERLY, 2014, 53 (01) : 100 - 106
  • [35] Effects of tempering on the mechanical properties of high strength dual-phase steels
    Kamp, A.
    Celotto, S.
    Hanlon, D. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 538 : 35 - 41
  • [36] Micromechanical analysis of orientation dependency on deformation behavior in DP steels by dislocation density-based crystal plasticity simulation
    Jafari, M.
    Saeidi, N.
    Ziaei-Rad, S.
    Jamshidian, M.
    Kim, H. S.
    MECHANICS OF MATERIALS, 2019, 134 : 132 - 142
  • [37] Characterization of the Trace Phosphorus Segregation and Mechanical Properties of Dual-Phase Steels
    Jing Wang
    Wei Li
    Xiaodong Zhu
    Li You
    Laiqi Zhang
    Acta Metallurgica Sinica (English Letters), 2022, 35 : 341 - 352
  • [38] Numerical Study on the Effect of Microstructure on the Mechanical Behaviour of Dual-Phase Steels
    Mangas, Angela
    Eguia, Inaki
    Ezkerra, Jon
    Mendiguren, Joseba
    Arechabaleta, Zaloa
    PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
  • [39] Characterization of the Trace Phosphorus Segregation and Mechanical Properties of Dual-Phase Steels
    Jing Wang
    Wei Li
    Xiaodong Zhu
    Li You
    Laiqi Zhang
    Acta Metallurgica Sinica(English Letters), 2022, 35 (02) : 341 - 352
  • [40] Effect of Intercritical Annealing on the Microstructural and Mechanical Behaviours of Dual-Phase Steels
    Osman, Nora
    Sajuri, Zainuddin
    Mohamed, Intan Fadhlina
    Omar, Mohd Zaidi
    Junaidi, Syarif
    JURNAL KEJURUTERAAN, 2020, 32 (04): : 71 - 78
12345