Deformation Behavior and Constitutive Equation Coupled the Grain Size of Semi-Solid Aluminum Alloy

被引：0
|
作者：
Yalin Lu
Miaoquan Li
Xingcheng Li
机构：
[1] Northwestern Polytechnical University,School of Materials Science and Engineering
[2] Jiangsu Teachers University of Technology,School of Mechanical Engineering
来源：
Journal of Materials Engineering and Performance | 2010年 / 19卷
关键词：
constitutive equation; deformation behavior; microstructural evolution; semi-solid state;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Isothermal compression tests on Al-4Cu-Mg alloy were carried out in semi-solid state. Deformation behavior and microstructural evolution are discussed in this paper. Meanwhile, a new constitutive equation, which couples the grain size and liquid volume fraction, has been established for the semi-solid deformation behavior. The results show that the maximum difference between the calculated with the experimental data is less than 15%. The present equation is satisfactory for describing the correlation between the flow stress and microstructure of semi-solid Al-4Cu-Mg alloy. The coupled simulation of the deformation behavior and microstructural evolution during the semi-solid forming would be conducted easily through writing the present equation in a FE code.
引用
收藏
页码：1337 / 1343
页数：6
相关论文
共 50 条
  • [41] Thixotropic behavior of semi-solid magnesium alloy
    Chen, Hsueh-I
    Chen, Jyh-Chen
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, 2006, 116-117 : 648 - 651
  • [42] Effects of deformation temperature and rate on compressive deformation behavior of Y112 die cast aluminum alloy in semi-solid state
    College of Materials Science and Engineering, Chongqing Institute of Technology, Chongqing 400050, China
    Trans Nonferrous Met Soc China, 2006, SUPPL. 3 (1323-1326):
  • [43] Semi-solid compression of 2A14 alloy with high solid fraction: rheology, constitutive equation and microstructure
    Yingze Liu
    Jufu Jiang
    Ying Zhang
    Minjie Huang
    Ying Wang
    Journal of Materials Science, 2022, 57 : 16507 - 16527
  • [44] Semi-solid compression of 2A14 alloy with high solid fraction: rheology, constitutive equation and microstructure
    Liu, Yingze
    Jiang, Jufu
    Zhang, Ying
    Huang, Minjie
    Wang, Ying
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (34) : 16507 - 16527
  • [45] The Influence of Strontium on Microstructural and Rheological Behavior of the Semi-solid A380 Aluminum Alloy
    João Paulo Gabre Ferreira
    Luciano Augusto Lourençato
    Angel Sánchez Roca
    Hipolito Domingo Carvajal Fals
    Metallurgical and Materials Transactions A, 2020, 51 : 6421 - 6431
  • [46] The Influence of Strontium on Microstructural and Rheological Behavior of the Semi-solid A380 Aluminum Alloy
    Ferreira, Joao Paulo Gabre
    Lourencato, Luciano Augusto
    Roca, Angel Sanchez
    Fals, Hipolito Domingo Carvajal
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (12): : 6421 - 6431
  • [47] The semi-solid tensile deformation behavior of wrought AZ31 magnesium alloy
    Abedi, H. R.
    Zarei-Hanzaki, A.
    Fatemi-Varzaneh, S. M.
    Roostaei, Ali A.
    MATERIALS & DESIGN, 2010, 31 (09): : 4386 - 4391
  • [48] Compressive deformation and forging behavior of Ti14 alloy in semi-solid state
    Chen, Y. N.
    Wei, J. F.
    Zhao, Y. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 520 (1-2): : 16 - 22
  • [49] Study on the deformation behavior of semi-solid AZ91d magnesium alloy
    Liu, Jing
    Han, Jin-Tao
    Li, Ya-Lin
    Xie, Shui-Sheng
    Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2006, 13 (05): : 22 - 25
  • [50] Research on the Semi-Solid Compressive Deformation Behavior of Ti-7Cu Alloy
    Chen, Yongnan
    Luo, Chuang
    Wang, Jiao
    Zhao, Yongqing
    Chen, Hong
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2016, 35 (01) : 29 - 35
12345