PAHs in baby food: assessment of three different processing techniques for the preparation of reference materials

被引:0
|
作者
José Fernando Huertas-Pérez
Luisa R. Bordajandi
Berit Sejerøe-Olsen
Håkan Emteborg
Andrea Baù
Heinz Schimmel
Marta Dabrio
机构
[1] Institute for Reference Materials and Measurements (IRMM),European Commission, Joint Research Centre
[2] University of Granada,Department of Analytical Chemistry, Faculty of Sciences
[3] European Food Safety Authority (EFSA),Unit on Biological Hazards and contaminants
[4] European Food Safety Authority (EFSA),Unit on Assessment and Methodological Support
来源
关键词
PAHs; Baby food; Matrix reference material; Processing;
D O I
暂无
中图分类号
学科分类号
摘要
A feasibility study for producing a matrix reference material for selected polycyclic aromatic hydrocarbons (PAHs) in baby food is reported. A commercially available baby food, containing carrots, potatoes, tomato, white beans and meat, was spiked with the so-called 15 + 1 PAHs included in the PAHs priority list for food of the EU, at a mass fraction level of 1 μg/kg. The contaminated baby food was further processed by autoclaving, freezing or freeze drying. The homogeneity of the three materials (bottle-to-bottle variation) and their short-term (4 weeks) and long-term (18 months) stability at different temperatures were assessed. To this end, an analytical method based on a solid–liquid extraction followed by cleaning up with gel permeation chromatography (GPC) and solid phase extraction (SPE) and GC-IDMS determination, was validated in-house. It could be demonstrated that the procedure fulfilled the demands for application to the homogeneity and isochronous stability studies for the candidate reference materials targeted here. All three materials proved to be sufficiently homogeneous for the intended use. Measurements on the autoclaved material provided the most promising results in terms of envisaged shelf life, although freeze drying was also found to be a suitable processing technique for most of the investigated PAHs. These results are an important step towards the development of a matrix reference material for PAHs in a processed food matrix in a presentation very similar to routine samples.
引用
收藏
页码:3069 / 3081
页数:12
相关论文
共 50 条
  • [31] Evaluation of three extraction methods for the isolation of PAHs from recycled paperboard materials intended for food contact applications
    Ioanna-Efpraxia Parigoridi
    Eleftheria Tsoumani
    Konstantoula Akrida-Demertzi
    Panagiotis G. Demertzis
    [J]. European Food Research and Technology, 2023, 249 : 665 - 673
  • [32] Evaluation of three extraction methods for the isolation of PAHs from recycled paperboard materials intended for food contact applications
    Parigoridi, Ioanna-Efpraxia
    Tsoumani, Eleftheria
    Akrida-Demertzi, Konstantoula
    Demertzis, Panagiotis G.
    [J]. EUROPEAN FOOD RESEARCH AND TECHNOLOGY, 2023, 249 (03) : 665 - 673
  • [33] Retention of denture bases fabricated by three different processing techniques - An in vivo study
    Kumar, V. H. Chalapathi
    Surapaneni, Hemchand
    Ravikiran, V.
    Chandra, B. Sarat
    Balusu, Srilatha
    Reddy, V. Naveen
    [J]. JOURNAL OF INTERNATIONAL SOCIETY OF PREVENTIVE AND COMMUNITY DENTISTRY, 2016, 6 (03): : 245 - 250
  • [34] PREPARATION TECHNIQUES FOR THIN-FILM SOLAR-CELL MATERIALS - PROCESSING PERSPECTIVE
    BASOL, BM
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1993, 32 : 35 - 40
  • [35] Growth assessment in infants and-toddlers using three different reference charts
    Nash, A
    Corey, M
    Sherwood, K
    Seeker, T
    Saab, J
    O'Connor, TL
    [J]. JOURNAL OF PEDIATRIC GASTROENTEROLOGY AND NUTRITION, 2005, 40 (03): : 283 - 288
  • [36] Preparation of candidate reference materials for trimethyl-lead analysis and assessment of their homogeneity and stability
    Wang, Y
    Harrison, RM
    Quevauviller, P
    [J]. APPLIED ORGANOMETALLIC CHEMISTRY, 1996, 10 (01) : 69 - 73
  • [37] 28Assessment of thermal variations in the pulpal chamber during fabrication of provisionals using two different techniques and three materials
    Nair, Srilakshmi
    Madhav, V. N. V.
    Saini, Ravinder S.
    Alshadidi, Abdulkhaliq Ali F.
    Aldosari, Lujain Ibrahim N.
    Heboyan, Artak
    [J]. TECHNOLOGY AND HEALTH CARE, 2024, 32 (02) : 1185 - 1197
  • [38] In situ quantitative assessment of food oral processing parameters: A review of feasible techniques and devices
    Liu, Jingjing
    Yu, Shixin
    Xu, Yifei
    Li, Jiangyong
    Liu, Boyu
    Liu, Shikun
    Ning, Haohao
    Xu, Dongfu
    Low, Sze Shin
    [J]. JOURNAL OF TEXTURE STUDIES, 2023, 54 (01) : 3 - 20
  • [39] Microleakage Assessment of Different Preparation Techniques and Pit and Fissure Sealants in Permanent Molars
    Bangash, Madeeha
    Humayun, Mashal
    Anser, Miraat
    Chaudhary, Farooq Ahmad
    Arjumand, Bilal
    Alharkan, Hamad Mohammad
    [J]. CUREUS JOURNAL OF MEDICAL SCIENCE, 2023, 15 (12)
  • [40] Effects of different food colorants and polishing techniques on color stability of provisional prosthetic materials
    Rutkunas, Vygandas
    Sabaliauskas, Vaidotas
    Mizutani, Hiroshi
    [J]. DENTAL MATERIALS JOURNAL, 2010, 29 (02) : 167 - 176