Investigations of the Mechanical and Microstructural Effects of Pinless Tool Geometry on Friction Stir Spot Welding Process

被引：0
|
作者：
Hande Güler Özgül
Orhan Dedeoğlu
机构：
[1] Uludag University,Department of Automotive Engineering, Faculty of Engineering
[2] Uludag University,Department of Automotive Engineering, Graduate School of Natural and Applied Sciences
来源：
Transactions of the Indian Institute of Metals | 2020年 / 73卷
关键词：
Friction stir spot welding; Aluminum alloys; Hardness; Shear force;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, mechanical properties, macrostructure and microstructure of the friction stir spot weld joints were investigated under the influence of pinless tool geometry and different rotation speed parameters (1350, 1850 and 2530 rpm) using Al5754 plates. Tensile shear strength tests were carried out for joints of different process parameters, and fracture surfaces were inspected by scanning electron microscopy; in addition, fracture modes of the joints were also evaluated. According to the results, the maximum strength values were obtained at 1850 rpm rotation speed, and ductile and brittle fractures were observed together.
引用
收藏
页码：2281 / 2289
页数：8
相关论文
共 50 条
  • [41] Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding
    Marzbanrad, Javad
    Akbari, Mostafa
    Asadi, Parviz
    Safaee, Samad
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1887 - 1894
  • [42] Effect of tool geometry and process parameters on mechanical properties of friction stir spot welded dissimilar aluminum alloys
    Ju-Ri Kim
    Eun-Yeong Ahn
    Hrishikesh Das
    Yong-Ha Jeong
    Sung-Tae Hong
    Michael Miles
    Kwang-Jin Lee
    International Journal of Precision Engineering and Manufacturing, 2017, 18 : 445 - 452
  • [43] Effect of Tool Geometry and Process Parameters on Mechanical Properties of Friction Stir Spot Welded Dissimilar Aluminum Alloys
    Kim, Ju-Ri
    Ahn, Eun-Yeong
    Das, Hrishikesh
    Jeong, Yong-Ha
    Hong, Sung-Tae
    Miles, Michael
    Lee, Kwang-Jin
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2017, 18 (03) : 445 - 452
  • [44] Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding
    Javad Marzbanrad
    Mostafa Akbari
    Parviz Asadi
    Samad Safaee
    Metallurgical and Materials Transactions B, 2014, 45 : 1887 - 1894
  • [45] Influence of tool geometry on mechanical and microstructural characteristics of friction stir welded cast alloys
    Bindhushree, B. S.
    Sevvel, P.
    Shanmuganatan, S. P.
    Saravanabavan, D.
    Madhusudan, M.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2024, 61 (05): : 292 - 318
  • [46] Effect of tool geometry on mechanical behavior of friction stir spot welds of polycarbonate sheets
    Lambiase, F.
    Paoletti, A.
    Di Ilio, A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (9-12): : 3005 - 3016
  • [47] Effect of tool geometry on mechanical behavior of friction stir spot welds of polycarbonate sheets
    F. Lambiase
    A. Paoletti
    A. Di Ilio
    The International Journal of Advanced Manufacturing Technology, 2017, 88 : 3005 - 3016
  • [48] Experimental and numerical investigation of a novel pinless friction stir spot welding for Al 1060 sheets
    Cao, Juyong
    Zhang, Jun
    Xing, Yanfeng
    Yang, Fuyong
    Zhang, Xiaobing
    Xia, Peiyun
    Ma, Xiaoyu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (5-6): : 2537 - 2546
  • [49] Effects of tool design on the microstructure and mechanical properties of refill friction stir spot welding of dissimilar Al alloys
    Shen, Z.
    Ding, Y.
    Gopkalo, O.
    Diak, B.
    Gerlich, A. P.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 252 : 751 - 759
  • [50] Microstructure and mechanical properties of refill friction stir spot welded joints: Effects of tool size and welding parameters
    Zou, Yangfan
    Li, Wenya
    Yang, Xiawei
    Su, Yu
    Chu, Qiang
    Shen, Zhikang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 5066 - 5080
12345