Analysis of boundary friction effect on the homogenization process of compacted bentonite/claystone mixture with technological voids upon hydration

Pre-compacted MX80 bentonite/Callovo-Oxfordian (COx) claystone mixture has been proposed to backfill and seal the underground galleries for radioactive waste disposal in France. While emplacing these pre-compacted blocks, technological voids are created between the blocks and the host rock and among the blocks themselves. It is expected that homogenization process will take place over time for the structure constructed with pre-compacted blocks upon hydration. This study investigated the boundary friction effect on such a process. Results showed that after the filling of technological voids, the soil far from the technological voids would swell further, while those near the voids would be compressed under the welling pressure generated by the soil behind, resulting in an increase in homogeneity in terms of dry density distribution. However, this homogenization process would stop after a certain time. Further examination showed that the homogenization process ended when the maximum boundary friction force became equal to or higher than the vector sum of swelling forces in the radial direction. Based on the force equilibrium and the mass conservation, the final dry density distribution was estimated. Comparison between the estimation and the measurement showed a good agreement, indicating the relevance of the identified mechanism related to boundary friction.