Wear Resistance Enhancement of Ti-6Al-4 V Alloy by Applying Zr-Modified Silicide Coatings

被引：0

作者：

Xuan Li

Guangzhong Hu

Jin Tian

Wei Tian

Wenling Xie

Xiulan Li

机构：

[1] Sichuan University of Science and Engineering,College of mechanical engineering

[2] Material Corrosion and Protection Key Laboratory of Sichuan province,undefined

[3] China United Northwest Institute for Design and Research,undefined

来源：

Journal of Materials Engineering and Performance | 2018年 / 27卷

关键词：

micro-hardness; silicide coating; Ti-6Al-4 V; wear resistance; Zr modification;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Zr-modified silicide coatings were prepared on Ti-6Al-4 V alloy by pack cementation process to enhance its wear resistance. The microstructure and wear properties of the substrate and the coatings were comparatively investigated using GCr15 and Al2O3 as the counterparts under different sliding loads. The obtained Zr-modified silicide coating had a multilayer structure, consisting of a thick (Ti,X)Si2 (X represents Al, Zr and V elements) outer layer, a TiSi middle layer and a Ti5Si4 + Ti5Si3 inner layer. The micro-hardness of the coating was much higher than the substrate and displayed a decrease tendency from the coating surface to the interior. Sliding against either GCr15 or Al2O3 balls, the coatings showed superior anti-friction property to the Ti-6Al-4 V alloy, as confirmed by its much lower wear rate under each employed sliding condition.

引用

页码：1073 / 1082

页数：9

共 50 条

[41] Effect of Nitride Coatings on the Wear and Fatigue Behavior of Titanium Alloy Ti-6Al-4V
Steinert, Ronny
Lindemann, Janny
Leyens, Christoph
TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 858 - 861
[42] The Effect of Coatings on the Wear Behavior of Ti6Al4V Alloy Used in Biomedical Applications
Danisman, S.
Odabas, D.
Teber, M.
9TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (BALKANTRIB'17), 2018, 295
[43] Study of yttrium and cerium on the oxidation resistance of silicide coatings prepared on Ti-6Al-4V alloy by pack-cementation process
于文海
田进
田伟
赵俊
李涌泉
刘言正
JournalofRareEarths, 2015, 33 (02) : 221 - 226
[44] Study of yttrium and cerium on the oxidation resistance of silicide coatings prepared on Ti-6Al-4V alloy by pack-cementation process
Yu Wenhai
Tian Jin
Tian Wei
Zhao Jun
Li Yongquan
Liu Yanzheng
JOURNAL OF RARE EARTHS, 2015, 33 (02) : 221 - 226
[45] Electrospark Cu-Ti coatings on titanium alloy Ti6Al4V: Corrosion and wear properties
Burkov, A. A.
Chigrin, P. G.
Dvornik, M. I.
SURFACE & COATINGS TECHNOLOGY, 2023, 469
[46] Ultrasonic and electrical discharge-assisted milling of the Ti-6Al-4 V alloy
Xu, Moran
Li, Changping
Kurniawan, Rendi
Chen Jielin
Kwak, Ye In
Ali, Saood
Choo, Min Ki
Ko, Tae Jo
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (3-4): : 1897 - 1917
[47] Fatigue behavior of Ti-6Al-4 V alloy manufactured by cold metal fusion
Kaschube, Deborah
Pawlowitz, Tobias
Solterbeck, Claus-Henning
Schloesser, Jana
Malekan, Mohammad
Bohlmann, Berend
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (03) : 647 - 661
[48] Investigation and Optimization of Laser Welding of Ti-6Al-4 V Titanium Alloy Plates
Caiazzo, Fabrizia
Alfieri, Vittorio
Corrado, Gaetano
Cardaropoli, Francesco
Sergi, Vincenzo
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2013, 135 (06):
[49] Wear resistance enhancement of titanium alloy (Ti-6A1-4V) by ball burnishing process
Revankar, Goutam Devaraya
Shetty, Raviraj
Rao, Shrikantha Srinivas
Gaitonde, Vinayak Neelakanth
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2017, 6 (01): : 13 - 32
[50] The effect of process parameters on the hardness and wear resistance performance of laser cladded ti-si coatings on ti-6al-4v alloy
Maswuma Z.
Popoola A.P.
International Journal of Microstructure and Materials Properties, 2019, 14 (01) : 1 - 13

← 1 2 3 4 5 →