Reducing emissions of noxious substances produced in heat energy generation process to environment

被引：0

作者：

Kushchev L.A. ^{[1
]}

Volabuev I.V. ^{[1
]}

Chuev K.A. ^{[1
]}

机构：

[1] Shukhov Belgorod State University, Belgorod

来源：

Chemical and Petroleum Engineering | 2011年 / 47卷 / 5-6期

关键词：

Heat Pump; Process Water; Combine Operation; Electric Power Plant; Thermodynamic Cycle;

D O I：

10.1007/s10556-011-9481-3

中图分类号：

学科分类号：

摘要：

The problems of reducing emissions of noxious substances while generating heat and electrical energy are scrutinized. A method is proposed for combined operation of a gas-turbine thermal and electric power plant and a heat pump, which helps reduce CO 2, NO x, and SO 2 emissions to the atmosphere as well as discharges of process waters into water bodies. This article is of interest to engineers and technologists dealing with issues of energy saving and environment protection. © 2011 Springer Science+Business Media, Inc.

引用

页码：398 / 399

页数：1

共 50 条

[41] Life cycle greenhouse gas emissions of low-temperature process heat generation by external compound parabolic concentrator (XCPC) solar thermal array
Pfadt-Trilling, Alyssa R.
Widyolar, Bennett K.
Jiang, Lun
Brinkley, Jordyn
Bhusal, Yogesh
Winston, Roland
Fortier, Marie-Odile P.
RENEWABLE ENERGY, 2023, 205 : 992 - 998
[42] Reversible and irreversible heat generation of NCA/Si-C pouch cell during electrochemical energy-storage process
Bai, Ying
Li, Limin
Li, Yu
Chen, Guanghai
Zhao, Huichun
Wang, Zhaohua
Wu, Chuan
Ma, Hongyun
Wang, Xinquan
Cui, Hongyue
Zhou, Jiang
JOURNAL OF ENERGY CHEMISTRY, 2019, 29 : 95 - 102
[43] Utilization of carbon-based energy as raw material instead of fuel with low CO2 emissions: Energy analyses and process integration of chemical looping ammonia generation
Fang, Jing
Xiong, Chuhao
Feng, Mingqian
Wu, Ye
Liu, Dong
APPLIED ENERGY, 2022, 312
[44] Utilization of carbon-based energy as raw material instead of fuel with low CO2 emissions: Energy analyses and process integration of chemical looping ammonia generation
Fang, Jing
Xiong, Chuhao
Feng, Mingqian
Wu, Ye
Liu, Dong
APPLIED ENERGY, 2022, 312
[45] Energy and GHG emissions assessment in a plastic injection process at machine component level: A case study of ABS plastic part produced in a Hybrid Injection Molding Machine
Avila, Javier
Borja, Vicente
Lopez-Parra, Marcelo
Ramirez-Reivich, Alejandro C.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017, VOL 2, 2018,
[46] Assessment of heat pump with carbon dioxide/low-global warming potential working fluid mixture for drying process: Energy and emissions saving potential
Dai, Baomin
Zhao, Pu
Liu, Shengchun
Su, Mingqiang
Zhong, Dan
Qian, Jiabao
Hu, Xiaowei
Hao, Ying
ENERGY CONVERSION AND MANAGEMENT, 2020, 222
[47] On energy, exergy, and environmental aspects of a combined gas-steam cycle for heat and power generation undergoing a process of retrofitting by steam injection
Ziolkowski, Pawel
Kowalczyk, Tomasz
Lemanski, Marcin
Badur, Janusz
ENERGY CONVERSION AND MANAGEMENT, 2019, 192 : 374 - 384
[48] Process development and thermodynamic analysis of a novel power generation plant driven by geothermal energy with liquefied natural gas as its heat sink
Sadaghiani, Mirhadi S.
Ahmadi, M. H.
Mehrpooya, Mehdi
Pourfayaz, F.
Feidt, Michel
APPLIED THERMAL ENGINEERING, 2018, 133 : 645 - 658
[49] Enhancing energy efficiency and reducing emissions in a novel biomass-geothermal hybrid system for hydrogen/ammonia production using machine learning and multi-level heat recovery
Yin, Nan
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 92 : 959 - 974
[50] Examining the synergistic diffusion process of carbon capture and renewable energy generation technologies under market environment: A multi-agent simulation analysis
Tan, Qinliang
Han, Jian
Liu, Yuan
ENERGY, 2023, 282

← 1 2 3 4 5 →