Geophysical Evaluation of Effectiveness of Blasting for Roof Caving During Longwall Mining of Coal Seam

被引:0
|
作者
Łukasz Wojtecki
Petr Konicek
Maciej J. Mendecki
Iwona Gołda
Wacław M. Zuberek
机构
[1] Central Mining Institute,Department of Geomechanics and Mining Research
[2] The Czech Academy of Sciences,Faculty of Earth Sciences
[3] Institute of Geonics,Faculty of Mining and Geology
[4] University of Silesia,undefined
[5] Silesian University of Technology,undefined
来源
关键词
Blasting for roof caving; SMT inversion; seismic source parameters; seismic effect method; longwall mining with caving;
D O I
暂无
中图分类号
学科分类号
摘要
Deep longwall mining of coal seams is made in the Upper Silesian Coal Basin (USCB) under complicated and mostly unfavourable geological and mining conditions. Usually, it is correlated with rockburst hazard mostly at a high level. One of the geological factors affecting the state of rockburst hazard is the presence of competent rocks in the roof of extracted coal seams, so rock falling behind the longwall face does not occur, and hanging-up of roof rocks remains. The long-lasting absence of caving may lead to an occurrence of high-energy tremor in the vicinity of the longwall face. Roof caving behind the longwall face may be forced by blasting. The column of explosives is then located in blastholes drilled in layers of roof rocks, e.g. sandstones behind the longwall face. In this article, a characterization of tremors initiated by blasts for roof caving during underground extraction of coal seam no. 507 in one of the collieries in the USCB has been made using three independent methods. By the basic seismic effect method, the effectiveness of blasting is evaluated according to the seismic energy of incited tremors and mass of explosives used. According to this method, selected blasts gave extremely good or excellent effect. An inversion of the seismic moment tensor enables determining the processes happening in the source of tremors. In the foci of provoked tremors the slip mechanism dominated or was clearly distinguished. The expected explosion had lesser significance or was not present. By the seismic source parameters analysis, among other things, an estimation of the stress drop in the focus or its size may be determined. The stress drop in the foci of provoked tremors was in the order of 105 Pa and the source radius, according to the Brune’s model, varied from 44.3 to 64.5 m. The results of the three mentioned methods were compared with each other and observations in situ. In all cases the roof falling was forced.
引用
收藏
页码:905 / 917
页数:12
相关论文
共 50 条
  • [31] Structure and deformation measurements of shallow overburden during top coal caving longwall mining
    Li Sheng
    Fan Chaojun
    Luo Mingkun
    Yang Zhenhua
    Lan Tianwei
    Zhang Haifeng
    INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY, 2017, 27 (06) : 1081 - 1085
  • [32] Internal Mechanism of Asymmetric Deformation and Failure Characteristics of the Roof for Longwall Mining of a Steeply Dipping Coal Seam
    Luo, Shenghu
    Wang, Tong
    Wu, Yongping
    Huangfu, Jingyu
    Zhao, Huatao
    ARCHIVES OF MINING SCIENCES, 2021, 66 (01) : 101 - 124
  • [33] The influence of distant coal seam edges on seismic hazard during longwall mining
    Łukasz Wojtecki
    Iwona Gołda
    Maciej J. Mendecki
    Journal of Seismology, 2021, 25 : 283 - 299
  • [34] Stability Analysis and Fracture Patterns of Hard Main Roof in Longwall Top Coal Caving with Large Mining Height
    Liu, Jinkai
    Li, Chunyuan
    Shi, Yaoyu
    Zhang, Yong
    SHOCK AND VIBRATION, 2021, 2021
  • [35] Structure and deformation measurements of shallow overburden during top coal caving longwall mining
    Li Sheng
    Fan Chaojun
    Luo Mingkun
    Yang Zhenhua
    Lan Tianwei
    Zhang Haifeng
    InternationalJournalofMiningScienceandTechnology, 2017, 27 (06) : 1081 - 1085
  • [36] CDEM simulation of top-coal caving characteristics under synchronous multiwindow drawing in longwall top-coal caving mining of extra-thick coal seam
    Zhao, Tielin
    Xu, Gang
    Zhou, Yuliang
    Huang, Zhizeng
    Xue, Jisheng
    Du, Longfei
    ENERGY SCIENCE & ENGINEERING, 2022, 10 (09) : 3617 - 3637
  • [37] Caving mechanisms of loose top-coal in longwall top-coal caving mining method
    Wang, Jiachen
    Yang, Shengli
    Li, Yang
    Wei, Like
    Liu, Haohao
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2014, 71 : 160 - 170
  • [38] Surface stepped subsidence related to top-coal caving longwall mining of extremely thick coal seam under shallow cover
    Ju, Jinfeng
    Xu, Jialin
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2015, 78 : 27 - 35
  • [39] Investigation into the behaviour of a support system and roof strata during sublevel caving of a thick coal seam
    Singh R.
    Singh T.N.
    Geotechnical & Geological Engineering, 1999, 17 (1) : 21 - 35
  • [40] Investigation into the behaviour of a support system and roof strata during sublevel caving of a thick coal seam
    Singh, Rajendra
    Singh, T.N.
    Geotechnical and Geological Engineering, 1999, 17 (01): : 21 - 35