Bond strength tests on deformed reinforcement in normal weight concrete

被引:0
|
作者
P. R. Walker
M. K. Batayneh
P. E. Regan
机构
[1] Oxford Brookes University,School of Construction & Earth Sciences
[2] Dari Construction,School of Architecture & Engineering
[3] University of Westminster,undefined
来源
Materials and Structures | 1997年 / 30卷
关键词
Bond Strength; Lateral Pressure; Concrete Cover; Bond Stress; Bond Ratio;
D O I
暂无
中图分类号
学科分类号
摘要
The primary aim of the research which is described in this paper was to investigate the effect of lateral pressure on the bond strength of deformed reinforcement set in normal weight concrete. A large number of tests was undertaken in which the main variables affecting bond strength were investigated. These included concrete strength, reinforcing bar diameter, concrete cover, lateral pressure, position of casting and bar spacing. A brief review of the small number of earlier investigations involving lateral pressures is provided. The paper provides details of the test specimens, the test apparatus and procedure, as well as typical results selected from approximately three hundred results. It draws conclusions on the appropriateness of the test method and the effects of the variables on the bond stress ratio and on bond strength.
引用
收藏
页码:424 / 429
页数:5
相关论文
共 50 条
  • [41] Experimental investigation of bond strength of hot-dip galvanized reinforcement in normal- and high-strength concrete
    Hamad, BS
    Mike, JA
    ACI STRUCTURAL JOURNAL, 2003, 100 (04) : 465 - 470
  • [42] Bond Strength and Corrosion Protection Properties of Hot-Dip Galvanized Prestressing Reinforcement in Normal-Strength Concrete
    Pokorny, Petr
    Chobotsky, Tomas
    Prodanovic, Nikola
    Steinerova, Veronika
    Hurtig, Karel
    JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (10):
  • [43] Cyclic Tests on Concrete Reinforcement for Development of Seismic Bond Model
    Mahrenholtz, Christoph
    Eligehausen, Rolf
    ACI MATERIALS JOURNAL, 2017, 114 (04) : 571 - 579
  • [44] Bond-slip Behaviour of Deformed Rebars in Normal and High Strength Concrete at Elevated Temperature-a review
    Buch, Shujaat Hussain
    Suhail, Raj
    AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING, 2022, 23 (03) : 189 - 204
  • [45] Strength and durability of lightweight and normal weight concrete
    Al-Khaiat, H
    Haque, N
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 1999, 11 (03) : 231 - 235
  • [46] Shear strength of normal strength concrete beams reinforced with deformed GFRP bars
    Yost, JR
    Gross, SP
    Dinehart, DW
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2001, 5 (04) : 268 - 275
  • [47] Bond strength of deformed steel bars in high-strength recycled aggregate concrete
    M. John Robert Prince
    Bhupinder Singh
    Materials and Structures, 2015, 48 : 3913 - 3928
  • [48] Bond strength of deformed steel bars in high-strength recycled aggregate concrete
    Prince, M. John Robert
    Singh, Bhupinder
    MATERIALS AND STRUCTURES, 2015, 48 (12) : 3913 - 3928
  • [49] An improved model for predicting bond strength of deformed rebars in concrete with stirrups
    Xu, Zhenwen
    Liu, Yi
    Zeng, Qiang
    Yan, Dongming
    ENGINEERING FRACTURE MECHANICS, 2022, 276
  • [50] Analytical bond strength of deformed bars in concrete due to splitting failure
    Feng Xu
    Zhimin Wu
    Weiwei Li
    Weiqing Liu
    Shuguang Wang
    Dongsheng Du
    Materials and Structures, 2018, 51