Strain Hardening Behavior of Dual-Phase Steels

被引：0
|
作者：
V. Colla
M. De Sanctis
A. Dimatteo
G. Lovicu
A. Solina
R. Valentini
机构：
[1] Scuola Superiore di Studi Universitari e di Perfezionamento Sant’Anna – Pisa,Dipartimento di Ingegneria Chimica, Chimica Industriale e Scienza dei materiali
[2] Università di Pisa – Pisa,undefined
来源：
Metallurgical and Materials Transactions A | 2009年 / 40卷
关键词：
Austenite; Martensite; Bainite; Steel Grade; Trip Steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A detailed qualitative and quantitative examination of the microstructure and mechanical properties of three different classes of DP600 and DP450 dual-phase (DP) steels was carried out. The tested DP steels are characterized by different alloying elements: aluminum, boron, and phosphorus. Among them, aluminum DP steels showed the lowest percentages of hard phases, while phosphorus DP steels exhibited the highest resistance values. The Hollomon, Pickering, Crussard–Jaoul (CJ), and Bergstrom models were used to reproduce the strain hardening behavior of DP steels. Relationships that correlate the fitting parameters with the chemical composition and the thermal cycle parameters were found, and the predictive abilities of different models were evaluated. The Pickering equation, among the tested models, is the best one in the reproduction of the experimental stress-strain data.
引用
收藏
页码：2557 / 2567
页数：10
相关论文
共 50 条
  • [41] Low-Temperature Deformation Mechanism and Strain-Hardening Behaviour of Laser Welded Dual-Phase Steels
    Aderibigbe, Isiaka
    Popoola, Patricia
    Sadiku, Emmanuel
    Biro, Elliot
    [J]. METALS, 2022, 12 (08)
  • [42] The Effect of Bake-Hardening Parameters on the Mechanical Properties of Dual-Phase Steels
    Ramazani, Ali
    Bruehl, Sonja
    Abbasi, Mahmoud
    Bleck, Wolfgang
    Prahl, Ulrich
    [J]. STEEL RESEARCH INTERNATIONAL, 2016, 87 (11) : 1559 - 1565
  • [43] Strain hardening exponent and strain rate sensitivity exponent of dual-phase steels at quasi-static strain rates during tensile testing
    Khraisat, W.
    [J]. COGENT ENGINEERING, 2023, 10 (02):
  • [44] THE EFFECTS OF MICROSTRUCTURAL VARIABLES ON THE WORK-HARDENING AND THE DUCTILITY OF DUAL-PHASE STEELS
    OWEN, WS
    [J]. JOURNAL OF METALS, 1985, 37 (11): : A7 - A7
  • [45] TEMPERING OF DUAL-PHASE STEELS
    DAVIES, RG
    [J]. JOURNAL OF METALS, 1980, 32 (12): : 45 - 45
  • [46] Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels
    Barlat, F.
    Vincze, G.
    Gracio, J. J.
    Lee, M. -G.
    Rauch, E. F.
    Tome, C. N.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2014, 58 : 201 - 218
  • [47] Properties of dual phase steels - Influence of morphology of martensite on tensile and strain hardening properties of dual phase steels
    Yazici, M
    Durmus, A
    Bayram, A
    [J]. MATERIALPRUFUNG, 2003, 45 (05): : 214 - 219
  • [48] FORMABILITY OF DUAL-PHASE STEELS
    EMBURY, JD
    DUNCAN, JL
    [J]. JOURNAL OF METALS, 1982, 34 (03): : 24 - 29
  • [49] Meso-Scopic Analysis of Strain Path Change Effect on the Hardening Behavior of Dual-Phase Steel
    Ha, Jinjin
    Lee, Jinwoo
    Kim, Ji Hoon
    Barlat, Frederic
    Lee, Myoung-Gyu
    [J]. STEEL RESEARCH INTERNATIONAL, 2014, 85 (06) : 1047 - 1057
  • [50] Tensile deformation behavior of dual-phase steels at elevated temperatures
    Sen, N.
    [J]. KOVOVE MATERIALY-METALLIC MATERIALS, 2020, 58 (01): : 1 - 12
12345