Precipitation and control of BN inclusions in 42CrMo steel and their effect on machinability

被引：0
|
作者：
Yu-nan Wang
Yan-ping Bao
Min Wang
Le-chen Zhang
机构：
[1] University of Science and Technology Beijing,State Key Laboratory of Advanced Metallurgy
[2] University of Science and Technology Beijing,School of Metallurgical and Ecological Engineering
[3] University of Science and Technology Beijing,National Engineering Research Center of Flat Rolling Equipment
来源：
International Journal of Minerals, Metallurgy, and Materials | 2013年 / 20卷
关键词：
steel; inclusions; boron nitrogen; precipitation; machinability;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The precipitation and control of boron nitrogen (BN) inclusions in 42CrMo steel were investigated and their effect on machinability was analyzed. First, the precipitation regularity of BN in 42CrMo steel was studied by theoretical calculation. Then, the machinability of the steel was investigated through contrast cutting experiments, and the composition and cooling rate of the steel were controlled to analyze the variation laws of the size, distribution, and area ratio of BN inclusions. Finally, the results were combined with the machinability of the steel to analyze the relationship among them. It is found that the machinability of the steel is mainly influenced by the diameter and quantity of BN inclusions. Fine and dispersedly distributed BN inclusions are more beneficial for the improvement in machinability of 42CrMo steel than coarse and sparse BN inclusions.
引用
收藏
页码：842 / 849
页数：7
相关论文
共 50 条
  • [21] Effect of processing parameters of laser on microstructure and properties of cladding 42CrMo steel
    Yan-hai Cheng
    Ran Cui
    Hao-zheng Wang
    Zheng-tong Han
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 1715 - 1724
  • [22] Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel
    Lin, Y. C.
    Chen, Ming-Song
    Zhong, Jue
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 205 (1-3) : 308 - 315
  • [23] Effect of processing parameters of laser on microstructure and properties of cladding 42CrMo steel
    Cheng, Yan-hai
    Cui, Ran
    Wang, Hao-zheng
    Han, Zheng-tong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (5-8): : 1715 - 1724
  • [24] Grinding Force of 42CrMo Steel in Grind-Hardening
    Wang, Gui-Cheng
    Zou, Jun-Feng
    Huang, Tian-Cheng
    Pei, Hong-Jie
    PROCEEDINGS OF THE 4TH 2016 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING (ICMSE 2016), 2016, 101 : 420 - 426
  • [25] RESIDUAL STRESS IN THE WHEEL OF 42CrMo STEEL DURING QUENCHING
    Li Yongkui
    Chen Jundan
    Lu Shanping
    ACTA METALLURGICA SINICA, 2014, 50 (01) : 121 - 128
  • [26] Grinding Characteristics of 42CrMo Steel in Grind-Hardening
    Wang, G. C.
    Zou, J. F.
    Huang, T. C.
    Pei, H. J.
    INTERNATIONAL CONFERENCE ON MATERIALS PROCESSING AND MECHANICAL MANUFACTURING ENGINEERING (MPMME 2015), 2015, : 275 - 282
  • [27] A novel titanium enhanced plasma nitriding for 42CrMo steel
    Mao, Changjun
    Wei, Kunxia
    Liu, Xiliang
    Yu, Xinhao
    Hu, Jing
    MATERIALS LETTERS, 2020, 262
  • [28] Assessment of microstructure in 42CrMo steel by Barkhausen noise analysis
    Li, Q
    Xu, CD
    Miao, LX
    Yuan, ZY
    CASE HISTORIES ON INTEGRITY AND FAILURES IN INDUSTRY, 1999, : 305 - 310
  • [29] Mechanical properties and dynamic constitutive model of 42CrMo steel
    Zhu, Zhiwu
    Lu, Yesen
    Xie, Qijun
    Li, Dingyuan
    Gao, Ning
    MATERIALS & DESIGN, 2017, 119 : 171 - 179
  • [30] Effect of laser shock peening on surface performance of slewing bearing steel 42CrMo
    Chen, Bin
    Zhang, Xing-Quan
    Surface Technology, 2019, 48 (02): : 62 - 68
12345