Statistical Comparison of Mechanical Properties of VT6 Alloy Bars with Different Structures

被引：0
|
作者：
Yu. B. Egorova
S. V. Skvortsova
L. V. Davydenko
O. N. Gvozdeva
机构：
[1] Moscow Aviation Institute (National Research University),
[2] Moscow Polytechnic University,undefined
来源：
Metallurgist | 2022年 / 66卷
关键词：
titanium alloy VT6; rolled bars; chemical composition; structure; mechanical properties; statistical studies; forecasting;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Experimental studies have revealed regularities in the joint influence of chemical composition, type, and parameters of the structure on the mechanical properties of VT6 alloy bars after annealing in various modes. Samples with a globular structure and the same chemical composition were found to have greater strength and ductility than transitional, mixed, and lamellar structures. At the same degree of strength, the relative elongation of bars with a globular structure is 5–7% higher than a lamellar one, and the transverse narrowing is approximately 15–20% higher. The characteristics of relative elongation of samples with mixed and transitional structures occupy an intermediate position between the globular and lamellar structures. Models have been developed to predict the ultimate strength, considering the chemical composition and structure of the bars. Recommendations are proposed to meet the requirements of industry standards for the mechanical properties of rolled bars made of VT6 alloy with a globular structure.
引用
收藏
页码：922 / 933
页数：11
相关论文
共 50 条
  • [31] Effect of initial structure on the mechanical properties of specimens of titanium alloy VT6 joined in the superplastic state
    R. Ya. Lutfullin
    M. Kh. Mukhametrakhimov
    Metal Science and Heat Treatment, 2006, 48 : 54 - 56
  • [32] Structure and Properties of Electroexplosion Molybdenum Coating Deposited on Titanium Alloy VT6
    Romanov, D. A.
    Sosnin, K. V.
    Pronin, S. Yu.
    Ivanov, Yu. F.
    Gromov, V. E.
    METAL SCIENCE AND HEAT TREATMENT, 2023, 64 (11-12) : 639 - 647
  • [33] Structure and Properties of VT6 Alloy Obtained by Layered Selective Sintering of a Powder
    A. D. Teresov
    Yu. F. Ivanov
    E. A. Petrikova
    N. N. Koval
    Russian Physics Journal, 2017, 60 : 1367 - 1372
  • [34] CHEMICOTHERMAL TREATMENT OF ALLOY VT6 TO IMPROVE ANTI-FRICTION PROPERTIES
    YANKO, VM
    VERETENNIKOV, YN
    LIFSHITS, OZ
    METAL SCIENCE AND HEAT TREATMENT, 1982, 24 (5-6) : 362 - 363
  • [35] Effect of hydrogen on superplasticity of the VT6 alloy sheets
    Portnoi, VK
    Novikov, II
    Ilin, AA
    Fedotov, IL
    Sirina, YV
    Mamonov, AM
    RUSSIAN METALLURGY, 1995, (06): : 77 - 81
  • [36] Structure and Properties of VT6 Alloy Obtained by Layered Selective Sintering of a Powder
    Teresov, A. D.
    Ivanov, Yu F.
    Petrikova, E. A.
    Koval, N. N.
    RUSSIAN PHYSICS JOURNAL, 2017, 60 (08) : 1367 - 1372
  • [37] Structure and properties of the metal of rods and stamped preforms for blades of VT6 alloy
    Tsybulina, IN
    Tulyakova, GA
    Uporova, VA
    METAL SCIENCE AND HEAT TREATMENT, 1996, 38 (1-2) : 38 - 41
  • [38] Low temperature superplasticity and production of hollow structures out of VT6 titanium alloy
    Lutfullin, R. Ya.
    Kruglov, A. A.
    Mukhametrakhimov, M. Kh.
    Rudenko, O. A.
    LETTERS ON MATERIALS, 2015, 5 (02): : 185 - 188
  • [39] Impact Toughness of Layered VT6 Alloy Semiproducts
    Ganeeva, A. A.
    Kruglov, A. A.
    Lutfullin, R. Ya.
    RUSSIAN METALLURGY, 2010, 2010 (10): : 948 - 952
  • [40] The effect of structure on mechanical behavior of VT6 titanium alloy under shock loading
    Sarkeeva, A. A.
    Lutfullin, R. Ya.
    Kruglov, A. A.
    Astanin, V. V.
    LETTERS ON MATERIALS, 2012, 2 (02): : 99 - 102
12345