Evaluation of post weld heat treatment quality of modified 9Cr-1Mo (P91) steel weld by magnetic coercive force measurements

被引：5

作者：

Sudharsanam, V. ^{[1
]}

Senthilkumar, V. ^{[2
]}

Raju, N. ^{[1
]}

Vetriselvan, R. ^{[1
]}

机构：

[1] Bharat Heavy Elect Ltd, Welding Res Inst, High Pressure Boiler Plant, Tiruchirappalli 620014, Tamil Nadu, India

[2] Natl Inst Technol, Dept Prod Engn, Tiruchirappalli 620015, Tamil Nadu, India

来源：

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING | 2015年 / 15卷 / 04期

关键词：

Magnetic coercive force; Modified 9Cr-1Mo steel; Post weld heat treatment; Precipitates; Hardness; MECHANICAL-PROPERTIES; MICROSTRUCTURE; STRENGTH;

D O I：

10.1016/j.acme.2015.05.006

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents a novel technique for evaluation of quality of post weld heat treatment (PWHT) of modified 9Cr-1Mo (P91) steel weld by correlation with its magnetic coercive force (MCF). The MCF of modified 9Cr-1Mo steel was studied in respect of different PWHT cycles involving ordered variations of soaking temperature unto 770 degrees C and soaking time unto 140 min. It was observed that MCF of the weld metal reduced with increase in both the soaking temperature and soaking time of PWHT. The drop in MCF of welds after PWHT was found to be dependent on the drop in the hardness of the weld and on the degree of carbide precipitations seen in the weld microstructure. Based on the study, a criterion was evolved for evaluation of heat treatment quality of the weld. (C) 2015 Politechnika Wrodawska. Published by Elsevier Sp. z o.o. All rights reserved.

引用

页码：847 / 853

页数：7

共 50 条

[41] Tensile Properties of Modified 9Cr-1Mo Steel Clad Tube to End Plug Weld Joint
Raju, M. Bala Parandhma
Sankaranarayanasamy, K.
Latha, S.
Prabhu, T. V.
Reddy, G. V. Prasad
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (05) : 3718 - 3725
[42] Numerical prediction and neutron diffraction measurement of the residual stresses for a modified 9Cr-1Mo steel weld
Kim, Seok-Hoon
Kim, Jong-Bum
Lee, Won-Jae
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) : 3905 - 3913
[43] Tensile Deformation Study on Heat Affected Zone of Mod. 9Cr-1Mo Steel Weld
R. Nikhil
S. A. Krishnan
A. Moitra
M. Vasudevan
Journal of Materials Engineering and Performance, 2023, 32 : 2288 - 2297
[44] HYDROGEN-ASSISTED CRACKING SUSCEPTIBILITY of modified 9Cr-1Mo steel and its weld metal
Albert, S. K.
Ramasubbu, V.
Raj, S. I. Sundar
Bhaduri, A. K.
WELDING IN THE WORLD, 2011, 55 (7-8) : 66 - 74
[45] Tensile Deformation Study on Heat Affected Zone of Mod. 9Cr-1Mo Steel Weld
Nikhil, R.
Krishnan, S. A.
Moitra, A.
Vasudevan, M.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (05) : 2288 - 2297
[46] Microstructure and Mechanical Properties of 9Cr-1Mo Steel Weld Fusion Zones as a Function of Weld Metal Composition
Arivazhagan, B.
Prabhu, Ranganath
Albert, S. K.
Kamaraj, M.
Sundaresan, S.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (08) : 999 - 1004
[47] Microstructure and Mechanical Properties of 9Cr-1Mo Steel Weld Fusion Zones as a Function of Weld Metal Composition
B. Arivazhagan
Ranganath Prabhu
S. K. Albert
M. Kamaraj
S. Sundaresan
Journal of Materials Engineering and Performance, 2009, 18 : 999 - 1004
[48] Finite element simulation of welded P91 steel pipe undergoing post-weld heat treatment
Yaghi, A. H.
Hyde, T. H.
Becker, A. A.
Sun, W.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (03) : 232 - 238
[49] Strain dependent rate equation to predict elevated temperature flow behavior of modified 9Cr-1Mo (P91) steel
Samantaray, Dipti
Phaniraj, C.
Mandal, Sumantra
Bhaduri, A. K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 1071 - 1077
[50] Study of Dissimilar Header Welding Between 2.25Cr-1Mo Steel and 9Cr-1Mo Steel with 9018 B9 Electrode Under Various Conditions of Post Weld Heat Treatment
Sultan, Abdur Rahman
Ravibharath, R.
Narayanasamy, R.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (08) : 2079 - 2092

← 1 2 3 4 5 →