The effect of temperature on the extrusion behavior of a polymer/ceramic refractory paste

被引：0
|
作者：
L. J. Wells
S. A. Nightingale
G. M. Spinks
机构：
[1] University of Wollongong,Institute for Steel Processing and Products, Faculty of Engineering
来源：
Journal of Materials Science | 2005年 / 40卷
关键词：
Polymer; Viscosity; Clay; Phenolic Resin; Extrusion Pressure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of temperature on the extrusion behavior of a polymer/ceramic refractory paste, known as taphole clay, has been investigated. Experiments were performed to determine the extrusion pressure and the viscosity of the paste’s phenolic resin binder between 30 and 60°C. The extrusion parameters were determined using the Benbow and Bridgwater method [1]. As the temperature was increased, a decrease in the extrusion pressure was observed. Three of the four Benbow and Bridgwater extrusion parameters were found to be dependent on temperature and the binder’s viscosity. From this data a model was produced using a modified Benbow and Bridgwater equation that predicts the effect of temperature on the extrusion pressure of the paste.
引用
收藏
页码：315 / 321
页数：6
相关论文
共 50 条
  • [41] Temperature measurement of polymer extrusion by ultrasonic techniques
    Chen, TF
    Nguyen, KT
    Wen, SSL
    Jen, CK
    MEASUREMENT SCIENCE AND TECHNOLOGY, 1999, 10 (03) : 139 - 145
  • [42] Low-temperature synthesis of cordierite phase in ceramic paste
    Khabas, T.A.
    Vereshchagin, V.I.
    Vakalova, T.V.
    Kirchanov, A.A.
    Kulikovskaya, N.A.
    Kozhevnikova, N.G.
    Ogneupory i Tekhnicheskaya Keramika, 2002, (10): : 42 - 46
  • [43] The ''sharkskin - effect'' in polymer extrusion.
    Koopmans, RJ
    Molenaar, J
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 2344 - 2348
  • [44] High-temperature oxidation behavior of polymer-derived SiHfBCN ceramic nanocomposites
    Yuan, J.
    Galetz, M.
    Luan, X. G.
    Fasel, C.
    Riedel, R.
    Ionescu, E.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (12) : 3021 - 3028
  • [45] `Sharkskin-effect' in polymer extrusion
    Dow Benelux N.V., Terneuzen, Netherlands
    J Eng Appl Sci, (2344-2348):
  • [46] Effect of rheology and cooling on paste extrusion using texture analysis
    Teoman, Baran
    Li, Nan
    Shen, Hongwei
    Pan, Long
    Dogo-Isonagie, Cajetan
    Potanin, Andrei
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2023, 679
  • [47] Effect of Extrusion Temperature and Extrusion Ratio on Microstructure and Biodegradation Behavior of Mg-4.5Zn Binary Alloy
    Shiri, Mahdi
    Jafari, Hassan
    JOM, 2019, 71 (12) : 4705 - 4714
  • [48] The effect of temperature gradients on the sharkskin surface instability in polymer extrusion through a slit die
    Erik Miller
    Sung Jin Lee
    Jonathan P. Rothstein
    Rheologica Acta, 2006, 45 : 943 - 950
  • [49] The effect of temperature gradients on the sharkskin surface instability in polymer extrusion through a slit die
    Miller, Erik
    Lee, Sung Jin
    Rothstein, Jonathan P.
    RHEOLOGICA ACTA, 2006, 45 (06) : 943 - 950
  • [50] Effect of Extrusion Temperature and Extrusion Ratio on Microstructure and Biodegradation Behavior of Mg-4.5Zn Binary Alloy
    Mahdi Shiri
    Hassan Jafari
    JOM, 2019, 71 : 4705 - 4714
12345