Mechanical properties of SiC ceramics sintered with RE2O3 (RE: Sc, Lu, Y) and AlN additives

被引：0

作者：

B. V. Manoj Kumar

Myong-Hoon Roh

Young-Wook Kim

Wonjoong Kim

Sang-Whan Park

机构：

[1] University of Seoul,Department of Materials Science and Engineering

[2] Korea Institute of Science and Technology,Materials Science and Technology Research Division

来源：

Metals and Materials International | 2010年 / 16卷

关键词：

ceramics; sintering; mechanical properties; scanning electron microscopy (SEM); silicon carbide;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Highly densified Silicon Carbide (SiC) ceramics with 10 vol.% sintering additives, RE2O3 (RE: Sc, Lu, Y) and AlN, were prepared via hot pressing in N2 atmosphere. The influence of sintering additive composition on the mechanical properties of the sintered specimens is discussed. The Sc2O3-AlN system consisted of equi-axed grain structure, while the Lu2O3-AlN and Y2O3-AlN systems rendered largely grown platelet grains. While fracture toughness was enhanced with regards to the contribution of crack deflection and crack bridging mechanisms for intergranular fracture, strength remained almost the same for all specimens.

引用

页码：229 / 233

页数：4

共 50 条

[31] Properties of transparent Re3+: Y2O3 ceramics doped with tetravalent additives
Osipov, V. V.
Shitov, V. A.
Maksimov, R. N.
Solomonov, V. I.
OPTICAL MATERIALS, 2015, 50 : 65 - 70
[32] Spectroscopic properties of newly flux grown and highly Yb3+-doped cubic RE2O3 (RE = Y, Gd, Lu) laser crystals
Velazquez, Matias
Veber, Philippe
Buse, Gabriel
Petit, Yannick
Goldner, Philippe
Jubera, Veronique
Rytz, Daniel
Jaffres, Anael
Peitz, Mark
Wesemann, Volker
Aschehough, Patrick
Aka, Gerard
OPTICAL MATERIALS, 2015, 39 : 258 - 264
[33] Observations on the Influence of Secondary Me Oxide Additives (Me = Si, Al, Mg) on the Microstructural Evolution and Mechanical Behavior of Silicon Nitride Ceramics Containing RE2O3 (RE = La, Gd, Lu)
Becher, Paul F.
Shibata, Naoya
Painter, Gayle S.
Averill, Frank
van Benthem, Klaus
Lin, Hua-Tay
Waters, Shirley B.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2010, 93 (02) : 570 - 580
[34] Effects of RE2O3 (RE = Tm, Sc, Yb) addition on the superconducting properties of ErBa2Cu3Oy
Kita, R.
Hosoya, N.
Otawa, N.
Kawabata, S.
Nakamura, T.
Miura, O.
Mukaida, M.
Yamada, K.
Ichinose, A.
Matsumoto, K.
Horii, M. S.
Yoshida, Y.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2009, 469 (15-20): : 1157 - 1160
[35] Effects of oxidation on surface stresses and mechanical properties of liquid phase pressureless-sintered SiC-AlN-Y2O3 ceramics
Magnani, Giuseppe
Brillante, Aldo
Bilotti, Lvano
Beaulardi, Leandro
Trentini, Elena
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2): : 381 - 388
[36] Electrical conductivity enhancement in nanocrystalline (RE2O3)0.08(ZrO2)0.92 (RE=Sc, Y) thin films
Zhang, YW
Jin, S
Yang, Y
Li, GB
Tian, SJ
Jia, JT
Liao, CS
Yan, CH
APPLIED PHYSICS LETTERS, 2000, 77 (21) : 3409 - 3411
[37] Flux growth of Yb3+-doped RE2O3 (RE = Y,Lu) single crystals at half their melting point temperature
Veber, Philippe
Velazquez, Matias
Jubera, Veronique
Pechev, Stanislav
Viraphong, Oudomsack
CRYSTENGCOMM, 2011, 13 (16) : 5220 - 5225
[38] Microstructure and mechanical properties of liquid-phase-sintered SiC with AlN and Y2O3 additions
Suzuki, K
Sasaki, M
CERAMICS INTERNATIONAL, 2005, 31 (05) : 749 - 755
[39] Microstructure and mechanical properties of AlN ceramics with Y2O3
Iwasawa, S
Tatami, J
Komeya, K
Meguro, T
CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS, 2005, 146 : 285 - 290
[40] Electrical and thermal properties of SiC-Zr2CN composites sintered with Y2O3-Sc2O3 additives
Jang, Seung Hoon
Kim, Young-Wook
Kim, Kwang Joo
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (02) : 477 - 484

← 1 2 3 4 5 →