Overblasting effects on surface properties of low-carbon steel

被引：0
|
作者：
A. W. Momber
Y. C. Wong
机构：
[1] Betriebsmittel für die Gewinnung mineralischer Rohstoffe (BGMR),Faculty of Georesources and Materials Technology, RWTH Aachen University
[2] Swinbume University of Technology,School of Engineering and Science
来源：
Journal of Coatings Technology and Research | 2005年 / 2卷
关键词：
Contact angle; grit-blasting; roughness; surface preparation; wettability; adhesion; hardness; scratch resistance; industrial maintenance; coating-substrate interface; iron; cast iron; steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The influence of overblasting on surface properties of low-carbon steel was investigated. In detail, surface roughness, contact angle, Vickers-hardness, degree of surface contamination, and pull-off strength were evaluated. It was shown that overblasting had notable effects on the surface properties. Most importantly, the surface roughness was significantly reduced, and the microhardness of the substrate increased. Also, overblasting increased surface wettability. The influence on the pull-off strength of applied coating systems was only marginal.
引用
下载
收藏
页码：453 / 461
页数：8
相关论文
共 50 条
  • [31] SURFACE SEGREGATION OF MANGANESE IN LOW-CARBON STEEL DURING ANNEALING
    HUDSON, RM
    BIBER, HE
    OLES, EJ
    WARNING, CJ
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1976, 7 (12): : 1857 - 1865
  • [32] Evidence of caffeine adsorption on a low-carbon steel surface in ethanol
    da Trindade, Leticia Guerreiro
    Goncalves, Reinaldo Simoes
    CORROSION SCIENCE, 2009, 51 (08) : 1578 - 1583
  • [33] DETERMINATION OF THE PLASTIC SURFACE-ENERGY IN LOW-CARBON STEEL
    MISICKO, R
    SLESAR, M
    KOVOVE MATERIALY-METALLIC MATERIALS, 1982, 20 (01): : 42 - 57
  • [34] Fine Structure and Fracture Surface of Low-Carbon Steel Welds
    R. E. Kryukov
    V. E. Gromov
    Yu. F. Ivanov
    N. A. Kozyrev
    Yu. A. Rubannikova
    Russian Physics Journal, 2022, 65 : 332 - 336
  • [35] Surface Pore Formation of Low-Carbon Steel for Cold Forging
    Utsunomiya, H.
    Kawajiri, S.
    Takahira, N.
    Sakai, T.
    Tanaka, T.
    POROUS METALS AND METALLIC FOAMS: METFOAM 2007, 2008, : 153 - 156
  • [36] Formation of the surface layer on a low-carbon steel in electrospark treatment
    Ivanov, V.I.
    Burumkulov, F. Kh
    Verkhoturov, A.D.
    Gordiyenko, P.S.
    Panin, Ye S.
    Konevtsov, L.A.
    Welding International, 2013, 27 (11) : 903 - 906
  • [37] EFFECTS OF HYDROGEN AND PRESTRAIN ON TENSILE PROPERTIES OF LOW-CARBON STEEL USED IN HYDROGEN PIPELINES
    Nishiguchi, Hiroshi
    Fukushima, Yoshihiro
    Matsuoka, Saburo
    EFFECTS OF HYDROGEN ON MATERIALS, 2009, : 365 - +
  • [38] Graphite in low-carbon steel
    Kinzel, AB
    Moore, RW
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1935, 116 : 318 - 329
  • [39] Study on the Stability of Microstructure and Mechanical Properties of Gradient Refined Microstructure on Low-Carbon Steel Surface
    Xiaomeng Zhou
    Lingyi Sun
    Wenwei Sun
    Xiangyang Mao
    Journal of Materials Engineering and Performance, 2021, 30 : 5667 - 5672
  • [40] Study on the Stability of Microstructure and Mechanical Properties of Gradient Refined Microstructure on Low-Carbon Steel Surface
    Zhou, Xiaomeng
    Sun, Lingyi
    Sun, Wenwei
    Mao, Xiangyang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (08) : 5667 - 5672
12345