Pressure infiltration of Al and Al-12 wt% Si alloy into compacts of SiC and oxidized SiC particles

被引:0
|
作者
J. T. TIAN
J. M. MOLINA
J. NARCISO
C. GARCÍA-CORDOVILLA
E. LOUIS
机构
[1] Universidad de Alicante,Departamento de Química Inorgánica
[2] Universidad de Alicante,Departamento de Física Aplicada
[3] Universidad de Alicante,Departamento de Química Inorgánica
[4] Alcoa Europe,Centro de Investigación y Desarrollo, Flat Rolling Products
[5] Universidad de Alicante,Departamento de Física Aplicada
[6] Universidad de Alicante,Unidad Asociada of the Consejo Superior de Investigaciones Científicas
来源
关键词
Contact Angle; Particle Volume Fraction; Threshold Pressure; Intrinsic Permeability; Apparent Contact Angle;
D O I
暂无
中图分类号
学科分类号
摘要
Oxidizing SiC particles is a common practice in the fabrication of SiC/Al composites through direct mixing of the liquid metal and the ceramic particles. This practice is addressed to reduce the reaction between the two materials. In a previous work it was concluded that oxidizing SiC particles scarcely affected the threshold pressure for infiltration of pure Al into compacts made of those particles. In this work we present a detailed study of this problem for infiltration of pure Al and the eutectic Al-Si alloy. Our results indicate that oxidizing of SiC particles does not affect significantly either the threshold pressure or the infiltration kinetics. This conclusion is equally valid for both pure Al and the eutectic alloy.
引用
收藏
页码:2537 / 2540
页数:3
相关论文
共 50 条
  • [31] Manufacture of Al/SiC composites by pressure infiltration process
    Yin, FZ
    Jia, CC
    Mei, XZ
    Ye, B
    Ping, YL
    Qu, XH
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 913 - 916
  • [32] The role of silicon alloying addition on the pitting corrosion resistance of an Al-12 wt.%Si alloy
    Pech-Canul, M.A.
    Pech-Canul, M.I.
    Bartolo-Pérez, P.
    Echeverría, M.
    Electrochimica Acta, 2014, 140 : 258 - 265
  • [33] Effect of heat treatment on tensile and fatigue deformation behavior of extruded Al-12 wt%Si alloy
    Gi-Su Ham
    Min-Seok Baek
    Jong-Ho Kim
    Si-Woo Lee
    Kee-Ahn Lee
    Metals and Materials International, 2017, 23 : 35 - 42
  • [34] Porosity Effect on Thermal Properties of Al-12 wt % Si/Graphite Composites
    Molina, Jose-Miguel
    Rodriguez-Guerrero, Alejandro
    Louis, Enrique
    Rodriguez-Reinoso, Francisco
    Narciso, Javier
    MATERIALS, 2017, 10 (02)
  • [35] High temperature deformation of a submicron grained Al-12 wt% Ti alloy
    Wang, SH
    Kao, PW
    SCRIPTA MATERIALIA, 1997, 36 (12) : 1397 - 1402
  • [36] Study on α-Al phase grain refinement agents of Al-12%Si cast alloy
    Jiang, Wenhui
    Han, Xinglin
    Zhu, Lihong
    Zhuzao/Foundry, 1997, (01): : 19 - 21
  • [37] Effect of fine-grained structural Al-12%Si materials on morphologies and crystal defects of eutectic Si in HCC Al-12%Si alloy billets
    Zhang, Jing
    Yu, Huashun
    Kang, Suk Bong
    Cho, Jae Hyung
    Min, Guanghui
    Stetsenko, Vladimir Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 541 : 157 - 162
  • [38] THE MICROSTRUCTURES AND PROPERTIES OF AN AL-12 WT PCT SI ALLOY PRODUCED BY A NEW LAYER-DEPOSITION PROCESS
    YEH, JW
    TSAU, CH
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (08): : 2313 - 2321
  • [39] Dispersoid particles precipitated during the solutionizing course of Al-12 wt %Si-4 wt%Cu-1.2 wt%Mn alloy and their influence on high temperature strength
    Liao, Hengcheng
    Tang, Yunyi
    Suo, Xiaojing
    Li, Guangjin
    Hu, Yiyun
    Dixit, Uday S.
    Petrov, Pavel
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 699 : 201 - 209
  • [40] Joining characteristics of oxidized SiC particles reinforced Al–Mg matrix composite prepared by reaction infiltration processing
    Zhongliang Shi
    Shijiro Ochiai
    Masaki Hojo
    Jaechul Lee
    Mingyuan Gu
    Hoin Lee
    Journal of Materials Research, 2001, 16 : 400 - 406