Fabrication and Characterization of Poly(L-lactic Acid) Fiber Mats Using Centrifugal Spinning

被引：0
|
作者：
Richard Patlan
Joscelyn Mejias
Zachary McEachin
Alfonso Salinas
Karen Lozano
机构：
[1] University of Texas-Rio Grande Valley,Mechanical Engineering Department
来源：
Fibers and Polymers | 2018年 / 19卷
关键词：
Nanofibers; Centrifugal spinning; Polylactic acid;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Polylactic acid (PLA) fine fibers and multi walled carbon nanotube (MWCNT) reinforced PLA fine fiber composites were developed utilizing a centrifugal spinning process. Chloroform and chloroform combined with dimethylformamide (DMF) were used to prepare solutions with varying concentrations of PLA and MWCNTs. The optimum spinning conditions to produce PLA fibers and its composites were determined. The morphology of the fibers was analyzed using scanning electron microscopy. In addition, X-ray diffraction analysis and thermo-physical characterization was conducted using thermogravimetric analysis and differential scanning calorimetry. PLA fibers with an average diameter of 481 nanometers and PLA/MWCNT fibers with an average diameter of 358 nanometers were obtained. A decrease in the crystallinity of the fibers was observed when compared to bulk PLA values.
引用
收藏
页码：1271 / 1277
页数：6
相关论文
共 50 条
  • [1] Fabrication and Characterization of Poly(L-lactic Acid) Fiber Mats Using Centrifugal Spinning
    Patlan, Richard
    Mejias, Joscelyn
    McEachin, Zachary
    Salinas, Alfonso
    Lozano, Karen
    FIBERS AND POLYMERS, 2018, 19 (06) : 1271 - 1277
  • [2] Fabrication and characterization of poly(L-lactic acid) porous microspheres
    Liu, Ruilai
    Huagong Jinzhan/Chemical Industry and Engineering Progress, 2018, 37 (05): : 1875 - 1880
  • [3] Characterization of poly(L-lactic acid) fibers produced by melt spinning
    Yuan, XY
    Mak, AFT
    Kwok, KW
    Yung, BKO
    Yao, KD
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 81 (01) : 251 - 260
  • [4] Preparation and Characterization of Caffeic Acid-Grafted Electrospun Poly(L-Lactic Acid) Fiber Mats for Biomedical Applications
    Chuysinuan, Piyachat
    Pavasant, Prasit
    Supaphol, Pitt
    ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (06) : 3031 - 3040
  • [5] Gallic Acid-Loaded Electrospun Poly(L-Lactic Acid) Fiber Mats and their Release Characteristic
    Chuysinuan, Piyachat
    Chimnoi, Nitirat
    Techasakul, Supanna
    Supaphol, Pitt
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 2009, 210 (10) : 814 - 822
  • [6] Fabrication and characterization of poly (ethylenimine) modified poly (l-lactic acid) nanofibrous scaffolds
    Guo, Rongying
    Chen, Shunyu
    Xiao, Xiufeng
    JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION, 2019, 30 (16) : 1523 - 1541
  • [7] Melt spinning of poly(L-lactic acid) and its biodegradability
    Nishimura, Y
    Takasu, A
    Inai, Y
    Hirabayashi, T
    JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 97 (05) : 2118 - 2124
  • [8] Poly (L-lactic acid)/layered silicate nanocomposite: Fabrication, characterization, and properties
    Krikorian, V
    Pochan, DJ
    CHEMISTRY OF MATERIALS, 2003, 15 (22) : 4317 - 4324
  • [9] Fabrication and characterization of nano composite scaffold of poly(l-lactic acid)/hydroxyapatite
    Xuejun Wang
    Guojun Song
    Tao Lou
    Journal of Materials Science: Materials in Medicine, 2010, 21 : 183 - 188
  • [10] Fabrication and Characterization of Poly(L-lactic acid)-polycaprolactone Composite Nanofiber Scaffolds
    He Zhihang
    Liu Jia
    Jiao Jianjin
    Wu Guifang
    Xiao Xiufeng
    CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, 2014, 35 (10): : 2265 - 2271
12345