Micromachining of quartz crystal with excimer lasers by laser-induced backside wet etching

被引：0

作者：

J. Wang

H. Niino

A. Yabe

机构：

[1] National Institute of Materials and Chemical Research,

[2] Higashi 1-1,undefined

[3] Tsukuba,undefined

[4] 305-8565 Ibaraki,undefined

[5] Japan (Fax: +81-298/54-4474,undefined

[6] E-mail: wangjun@nimc.go.jp; yabe@nimc.go.jp),undefined

来源：

Applied Physics A | 1999年 / 69卷

关键词：

PACS: 42.62; 81.40; 81.65;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

We fabricated a well-defined pattern of lines and spaces on the surface of a quartz crystal plate (c-SiO2) with micron-sized features, using laser-induced backside wet etching (LIBWE). The line patterns obtained using LIBWE showed a high aspect ratio of about 3. The etch rates of fused silica (a-SiO2) ranged from 5 to 25 nm/pulse with KrF laser irradiation from 0.4–1.3 J/cm2. Threshold fluences for a-SiO2 and c-SiO2 were 0.23 and 0.34 J/cm2, respectively. The single-pulse etch depth was not affected by the repetition rates of laser pulses from 1–50 Hz.

引用

页码：S271 / S273

共 50 条

[1] Micromachining of quartz crystal with excimer lasers by laser-induced backside wet etching
Wang, J
Niino, H
Yabe, A
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 1999, 69 (Suppl 1): : S271 - S273
[2] Laser-induced backside wet etching of sapphire
Ding, XM
Sato, T
Kawaguchi, Y
Niino, H
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 2003, 42 (2B): : L176 - L178
[3] Laser-induced backside wet etching of sapphire
Niino, H. (niino.hiro@aist.go.jp), 1600, Japan Society of Applied Physics (42):
[4] Thermoplasmonic laser-induced backside wet etching
Shubny, A. G.
Epifanov, E. O.
Minaev, N. V.
Yusupov, V. I.
JOURNAL OF LASER APPLICATIONS, 2022, 34 (03)
[5] Surface microstructuring of transparent materials by laser-induced backside wet etching using excimer laser
Niino, H
Ding, XM
Kurosaki, R
Narazaki, A
Sato, T
Kawaguchi, Y
FOURTH INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2003, 5063 : 193 - 201
[6] Thermoplasmonic laser-induced backside wet etching of sapphire
Tsvetkov, M. Yu
Minaev, N., V
Akovantseva, A. A.
Timashev, P. S.
Muslimov, A. E.
Kanevskii, V. M.
QUANTUM ELECTRONICS, 2019, 49 (02) : 133 - 140
[7] Microfabrication of a fluoropolymer film using conventional XeCl excimer laser by laser-induced backside wet etching
Natl Inst of Materials and Chemical, Research, Ibaraki, Japan
Jpn J Appl Phys Part 2 Letter, 7 A (L761-L763):
[8] Microfabrication of a fluoropolymer film using conventional XeCl excimer laser by laser-induced backside wet etching
Wang, J
Niino, H
Yabe, A
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1999, 38 (7A): : L761 - L763
[9] Chemical and structural changes of quartz surfaces due to structuring by laser-induced backside wet etching
Kopitkovas, G.
Deckert, V.
Lippert, T.
Raimondi, F.
Schneider, C. W.
Wokaun, A.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2008, 10 (22) : 3195 - 3202
[10] Interpretation and Modeling of Laser-Induced Backside Wet Etching Procedure
Vass, Csaba
Budai, Judit
Schay, Zoltan
Hopp, Bela
JOURNAL OF LASER MICRO NANOENGINEERING, 2010, 5 (01): : 43 - 47

← 1 2 3 4 5 →