The influence of iron powder cladding with nickel on properties of sintered materials

被引：2
|
作者：
Meilakh A.G. [1 ]
机构：
[1] Institute of Metallurgy, Ural Branch, Russian Academy of Sciences, Yekaterinburg
来源：
Inorganic Materials: Applied Research | 2017年 / 8卷 / 3期
关键词：
activated sintering; cladding of powders; physicomechanical properties; powder materials; structure; thermal treatment;
D O I：
10.1134/S2075113317030170
中图分类号：
学科分类号：
摘要：
This article discusses sintering of sprayed iron powder cladded with nickel. Mechanisms of packing and formation of structural characteristics and mechanical properties as a function of sintering temperature, composition, application procedure, and conditions of thermal treatment of 0.5–2.0% Ni coatings are determined. Cladding upon combined use of post reduction of coatings with sintering makes it possible to reduce the porosity by 2–3% and to improve the mechanical properties of materials by 1.4–1.9 times in comparison with composites based on micropowder blends. © 2017, Pleiades Publishing, Ltd.
引用
收藏
页码：469 / 472
页数：3
相关论文
共 50 条
  • [41] The influence of iron content and Powder Metallurgy processing route on microstructure and mechanical properties of cobalt-iron materials
    Frydrych, H
    Romanski, A
    Konstanty, J
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2004, 49 (04): : 973 - 980
  • [42] MECHANICAL-PROPERTIES OF SINTERED IRON SHEETS CONTAINING REDUCED IRON-POWDER WITH GANGUE
    SUZUKI, Y
    SAYAMA, S
    NISHIDA, K
    [J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1981, 21 (01) : 32 - 39
  • [43] Investigation and optimization of properties of sintered iron/recycled grey cast iron powder metallurgy parts
    Abdollahi, Hadi
    Mahdavinejad, Ramezanali
    Leavoli, Rohallah Panahi
    Ghambari, Mohammad
    Moradi, Mahmoud
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (06) : 1010 - 1020
  • [44] Research on the soft magnetic properties of iron–nickel magnetic powder core composite with carbonyl iron powder
    S. Y. Deng
    K. Zhu
    Y. Zhang
    Y. Zhu
    F. Hu
    X. C. Kan
    [J]. Journal of Materials Science: Materials in Electronics, 2024, 35
  • [45] The study of fatigue behaviour at the contact of some sintered materials from powder based on iron
    Brandusan, L.
    Arghir, G.
    [J]. MATERIALS AND TECHNOLOGIES, 2007, 23 : 115 - 118
  • [46] Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding
    Tafti, Atefeh A.
    Demers, Vincent
    Vachon, Guillem
    Brailovski, Vladimir
    [J]. POWDER TECHNOLOGY, 2023, 420
  • [47] Reliability of mechanical properties of induction sintered iron based powder metal parts
    Civi, Can
    Tahrali, Necati
    Atik, Enver
    [J]. MATERIALS & DESIGN, 2014, 53 : 383 - 397
  • [48] PROPERTIES OF VACUUM SINTERED BRONZE BEARINGS - INFLUENCE OF COPPER-POWDER
    ACHARYA, NN
    MUKUNDA, PG
    BOSE, A
    [J]. POWDER METALLURGY INTERNATIONAL, 1984, 16 (05): : 212 - 216
  • [49] Influence of Nickel Powder Particle Size on the Microstructure and Densification of Spark Plasma Sintered Nickel-Based Superalloy
    Ogunbiyi, Olugbenga
    Jamiru, Tamba
    Sadiku, Rotimi
    Adesina, Oluwagbenga
    Adesina, Olanrewaju Seun
    Olorundaisi, Emmanuel
    [J]. INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2021, 53 : 1 - 19
  • [50] THE INFLUENCE OF ABNORMAL BRITTLENESS ON THE IMPACT PROPERTIES OF SINTERED IRON (REPRINTED)
    KUROKI, H
    TOKUNAGA, Y
    [J]. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1984, 20 (02): : 163 - &
12345