Effect of heat transfer on the transient dynamics of temperature swing adsorption process

被引:0
|
作者
Min-Bae Kim
Jong-Ho Moon
Chang-Ha Lee
Hyungwoong Ahn
Wonihl Cho
机构
[1] Yonsei University,Department of Chemical Engineering
[2] University College London,Department of Chemical Engineering
[3] Korea Gas Corporation,LNG Technology Research Center, R&D Division
来源
关键词
Radial Heat Transfer; Adsorption; Thermal Regeneration; TSA; Air-Drying;
D O I
暂无
中图分类号
学科分类号
摘要
The effect of radial heat transfer on temperature swing adsorption (TSA) was studied by using an air-drying TSA experiment. The experimental dynamics of water adsorption and thermal regeneration in a fixed bed packed with zeolite 13X were used to evaluate the predicted results from the developed models. One-and two-dimensional models for energy balance with various equations describing internal velocity were compared in terms of the prediction of transient dynamics of TSA. Since the heat effect in adsorption step depended on the isosteric heat of adsorption, a dynamic simulation was performed under adiabatic, near-adiabatic, and constant wall temperature conditions. A comparison between one-and two-dimensional models was also made under near-adiabatic condition, which reflected on the experimental condition. There was little difference between adsorption breakthrough curves predicted by the one- and two-dimensional models because the radial distribution of temperature was negligible at the adsorption step. In the case of the regeneration step, a small difference between two models was expected just at the early period of time because the radial effect disappeared with time. One-dimensional model could provide an adequate prediction of the transient dynamics in this system when the wall energy balance was included.
引用
收藏
页码:703 / 711
页数:8
相关论文
共 50 条
  • [41] Heat and mass transfer in pressure swing adsorption of sulfur dioxide gas by activated carbon
    School of Energy Science and Engineering, Central South University, Changsha
    410083, China
    不详
    530004, China
    不详
    510010, China
    不详
    100084, China
    Zhongnan Daxue Xuebao (Ziran Kexue Ban), 5 (1959-1966):
  • [42] Heat transfer of the adsorption process in a confined fluidized bed
    Zabierowski, Piotr
    CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA, 2008, 29 (01): : 191 - 200
  • [43] Numerical simulation on fixed bed adsorption process with coupled effect of heat and mass transfer
    Li, Liqing
    Sun, Zheng
    Xing, Jundong
    Liu, Wei
    Song, Jianfei
    Liu, Zheng
    Huagong Xuebao/CIESC Journal, 2010, 61 (11): : 2810 - 2816
  • [44] Effect of Regimes of Heat Transfer on the Temperature Field in Crystals during the Czochralski Process
    Mitin K.A.
    Berdnikov V.S.
    Bulletin of the Russian Academy of Sciences: Physics, 2022, 86 (7) : 823 - 829
  • [45] Steam-assisted temperature swing adsorption for carbon capture integrated with heat pump
    Liu, W.
    Huang, Y.
    Zhang, X. J.
    Fang, M. X.
    Liu, X.
    Wang, T.
    Jiang, L.
    CASE STUDIES IN THERMAL ENGINEERING, 2023, 49
  • [46] Analysis on temperature vacuum swing adsorption integrated with heat pump for efficient carbon capture
    Liu, W.
    Ji, Y.
    Wang, R. Q.
    Zhang, X. J.
    Jiang, L.
    APPLIED ENERGY, 2023, 335
  • [47] Pressure swing adsorption-solvent vapor recovery: Process dynamics and parametric study
    Liu, YJ
    Ritter, JA
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1996, 35 (07) : 2299 - 2312
  • [48] Mass transfer kinetics in pressure swing adsorption
    Chahbani, MH
    Tondeur, D
    SEPARATION AND PURIFICATION TECHNOLOGY, 2000, 20 (2-3) : 185 - 196
  • [49] Design and economics of a hybrid membrane-temperature swing adsorption process for upgrading biogas
    Shao, Pinghai
    Dal-Cin, Mauro
    Kumar, Ashwani
    Li, Haibin
    Singh, Davinder Paul
    JOURNAL OF MEMBRANE SCIENCE, 2012, 413 : 17 - 28
  • [50] Roles of heat transfer modes on transient cooling by quenching process
    Brahim Bourouga
    Jérôme Gilles
    International Journal of Material Forming, 2010, 3 : 77 - 88