Prevention of Partial Discharges in the Solid Insulation of High-Voltage Current Lines

被引：0
|
作者：
Varivodov V.N. [1 ]
Kovalev D.I. [1 ]
Zhulikov S.S. [1 ]
Golubev D.V. [1 ]
Romanov V.A. [2 ]
机构：
[1] National Research University “Moscow Power Engineering Institute”, Moscow
[2] LLC Energotechrazvitie, Moscow
来源：
Russian Electrical Engineering | 2021年 / 92卷 / 08期
关键词：
cast polymer insulation; current lines; dielectric strength; partial discharges; shielding;
D O I：
10.3103/S1068371221080125
中图分类号：
学科分类号：
摘要：
Abstract: In this paper, we show the effect of partial discharges in gas inclusions on the short- and long-term electric strength of cast epoxy insulation. The effect of the characteristics of the technological process of manufacturing current lines on the development of these defects is revealed. The most effective ways to improve the adhesion of epoxy compounds and cast current-carrying elements are experimentally studied and identified. Regularities of the influence of technological factors on the adhesion and autohesion of cast polymer insulation containing internal current-carrying elements as applied to the conditions of their operation in high-voltage current lines are revealed. Specific technical solutions to improve the adhesion and autohesion of epoxy compounds and to eliminate gas inclusions in cast insulation, leading to an increase in the dielectric strength and reliability of high-voltage current lines with cast insulation, are substantiated. Such technical solutions are emphasized to be necessary in the development of high-voltage current lines for a rated voltage of 20 kV and above. © 2021, Allerton Press, Inc.
引用
收藏
页码：438 / 441
页数：3
相关论文
共 50 条
  • [21] SOLID INSULATION SYSTEM FOR AIRBORNE HIGH-VOLTAGE COMPONENTS AND SYSTEMS
    PARKER, RD
    BURITZ, RS
    BURNHAM, J
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS AND CONTROL INSTRUMENTATION, 1975, IE22 (02): : 146 - 151
  • [22] SOLID INSULATION SYSTEM FOR AIRBORN HIGH-VOLTAGE COMPONENTS AND SYSTEMS
    PARKER, RD
    BURITZ, RS
    BURNHAM, J
    IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, 1974, AE10 (05) : 743 - 743
  • [23] On the Application of Solid Polymer Insulation for Indoor High-Voltage Equipment
    Varivodov, V.N.
    Kovalev, D.I.
    Zhulikov, S.S.
    Golubev, D.V.
    Nesterenko, A.A.
    Russian Electrical Engineering, 2024, 95 (08) : 670 - 675
  • [24] HIGH-VOLTAGE SPARK DISCHARGES
    BRUCE, FM
    ENDEAVOUR, 1954, 13 (50) : 61 - 71
  • [25] Comparison of symptoms of partial discharges on high voltage cable with connector through high-voltage measurements
    Lelak, Jaroslav
    Kment, Attila
    Vary, Michel
    PROCEEDINGS OF THE 5TH INTERNATIONAL SCIENTIFIC SYMPOSIUM ON ELECTRIC POWER ENGINEERING - ELEKTROENERGETIKA 2009, 2009, : 257 - 258
  • [26] EFFECT OF THE THICKNESS OF INSULATION OF PROTECTED WIRES OF HIGH-VOLTAGE OVERHEAD TRANSMISSION LINES TO THEIR CURRENT CARRYING CAPACITY
    Bezprozvannych, G. V.
    Zolotaryov, V. M.
    Antonets, Yu. A.
    ELECTRICAL ENGINEERING & ELECTROMECHANICS, 2018, (02) : 41 - 46
  • [27] PARTIAL DISCHARGES IN HIGH-VOLTAGE PIEZOELECTRIC GENERATORS UNDER SLOW COMPRESSION
    GARABEDIAN, C
    GONNARD, P
    OHANESSIAN, H
    JOURNAL DE PHYSIQUE III, 1993, 3 (08): : 1603 - 1615
  • [28] Imitations of high-voltage insulation
    不详
    NATURE, 1938, 141 : 86 - 86
  • [29] Determination of insulation parameters of high-voltage current transformers under working voltage
    Orlovskij, I.A.
    Izvestiya Vysshikh Uchebnykh Zavedenii, Energetika, 1992, (03):
  • [30] HIGH-VOLTAGE INSULATION APPLICATIONS
    DAKIN, TW
    IEEE TRANSACTIONS ON ELECTRICAL INSULATION, 1978, 13 (04): : 318 - 326
12345