Electrical Properties and Microstructure of 3D Printed Anodes Based on the Ni/Ce0.8Gd0.2O2 Composite for Solid Oxide Fuel Cells

被引：1
|
作者：
Asmedianova, A. D. [1 ,2 ]
Titkov, A. I. [1 ]
机构：
[1] Russian Acad Sci, Siberian Branch, Inst Solid State Chem & Mechanochem, Novosibirsk, Russia
[2] Novosibirsk State Univ, Novosibirsk, Russia
来源：
RUSSIAN JOURNAL OF ELECTROCHEMISTRY | 2024年 / 60卷 / 01期
关键词：
fuel cells; hydrogen; 3D printing; additive manufacturing; SOFC ANODES; ELECTROLYTES;
D O I：
10.1134/S1023193524010026
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
A series of planar billets of NiO/Ce0.8Gd0.2O2 (NiO/GDC) anodes for solid oxide fuel cells are fabricated by the method of microdrop 3D printing using a pneumatic dispenser. The porosity and the coefficient of sintering-induced shrinkage of anode billets are studied as a function of their preparation method. The anode billets are reduced to obtain Ni/Ce0.8Gd0.2O2 cermet and the thus obtained samples are studied as regards the effect of printing parameters on their morphology and structure. It is shown that the use of 3D printing increases the porosity of the Ni/GDC composite from 7 to 23% as compared with the casted samples, on retention of the high conductivity of (2.82 +/- 0.06) x 10(3) S/cm.
引用
收藏
页码：62 / 66
页数：5
相关论文
共 50 条
  • [41] Effect of Doped Manganese Oxide on the Properties of Ce0.8Gd0.2O2-δ Solid Electrolyte
    Zhang, Zhijuan
    MATERIALS SCIENCE AND NANOTECHNOLOGY I, 2013, 531-532 : 362 - 367
  • [42] Preparation and characterization of NiO-Sm0.2Ce0.8O1.9 composite nanoparticles for solid oxide fuel cell anodes
    Xu, Bo
    Tian, Dong
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MECHATRONICS, ROBOTICS AND AUTOMATION (ICMRA 2015), 2015, 15 : 813 - 817
  • [43] EFFECT OF RHODIUM INFILTRATION ON THE MICROSTRUCTURE AND PERFORMANCE OF Ni/Ce0.8Gd0.2O2-delta CERMET ANODE FOR LOW TEMPERATURE SOLID OXIDE FUEL CELL
    Torknik, F. S.
    Keyanpour-Rad, M.
    Maghsoudipour, A.
    Choi, G. M.
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2016, 13 (01) : 43 - 49
  • [44] Microstructural refinement of Ni/Ce0.8Gd0.2O2-δ anodes for low-temperature solid oxide fuel cell by wet infiltration loading of PdCl2
    Torknik, Fatemeh Sadat
    Maghsoudipour, Amir
    Keyanpour-Rad, Mansoor
    Choi, Gyeong Man
    Oh, Sang Ho
    Shin, Ga-Young
    CERAMICS INTERNATIONAL, 2014, 40 (08) : 12299 - 12312
  • [45] Evaluation of Ni and Ni-Ce0.8Sm0.2O2-δ (SDC) impregnated 430L anodes for metal-supported solid oxide fuel cells
    Zhou, Yucun
    Yuan, Chun
    Chen, Ting
    Meng, Xie
    Ye, Xiaofeng
    Li, Junliang
    Wang, Shaorong
    Zhan, Zhongliang
    JOURNAL OF POWER SOURCES, 2014, 267 : 117 - 122
  • [46] Properties and electrochemical performance of La0.75Sr0.25Cr0.5Mn0.5O3-δ-La0.2Ce0.8O2-δ composite anodes for solid oxide fuel cells
    Rath, Manas K.
    Choi, Byung-Hyun
    Lee, Ki-Tae
    JOURNAL OF POWER SOURCES, 2012, 213 : 55 - 62
  • [47] Ca3Co2O6-Ce0.8Sm0.2O1.9 composite cathode material for solid oxide fuel cells
    Li, Fushao
    Xia, Shubiao
    Xu, Yingxian
    Yan, Yuxing
    Sun, Chengke
    Jiang, Long
    Huang, Yunhui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 753 : 292 - 299
  • [48] Synthesis of NiO-Ce0.8Sm0.2O1.9 composite nanopowders for solid oxide fuel cells
    Ding, C.
    Lin, H.
    Sato, K.
    Hashida, T.
    WATER DYNAMICS, 2008, 987 : 30 - +
  • [49] One dimensional La0.8Sr0.2Co0.2Fe0.8O3-δ/Ce0.8Gd0.2O1.9 nanocomposite cathodes for intermediate temperature solid oxide fuel cells
    Zhao, Erqing
    Jia, Zheng
    Zhao, Li
    Xiong, Yueping
    Sun, Chunwen
    Brito, Manuel E.
    JOURNAL OF POWER SOURCES, 2012, 219 : 133 - 139
  • [50] Inkjet printing of multiple Ce0.8Gd0.2O2 buffer layers on a Ni-5% W substrate
    Mosiadz, M.
    Tomov, R. I.
    Hopkins, S. C.
    Martin, G.
    Holzapfel, B.
    Glowacki, B. A.
    9TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS 09), 2010, 234
12345